Справочник Пользователя для Mitsubishi Electronics WD-62825

58

59

Copy-Protected Material

When attempting to record copy-protected material, 
the Record functions of the NetCommand and IEEE 

1394 systems may be prevented or stopped.  If you 

have a recording that is tagged “Record Once”, 
NetCommand will change the tag to “Record No More”.

Restrictions for Traditional VCRs

If turned On, the TV must be tuned to the source device. 

• Your VCR should be connected directly to Audio  

 

Video 1.

• The VCR must be set manually to “Line Input”.   

   

Display the Device Selection menu, highlight the VCR  

 

and press GUIDE to change VCR inputs.

• The TV can select channels on compatible cable  

 

boxes for recordings.  Leave the cable box turned on.

• If the source device or recording device does not have  

 

separate power On and Off features, then leave that  

 

device powered On.

Direct VCR Recording from an Antenna or Cable Source,    
Copy-Protected Material and Restricitons for Traditional VCRs

Direct VCR Recording from an 
Antenna or Cable Source:

Pressing REC (record) on the TV’s remote control will 
function the same way as pressing the record button 
on the VCR’s remote control or front panel.

To record directly from antenna or cable: 

1.  Press DEVICE on the TV’s remote to display the 

Device Selection menu. Highlight the traditional 

VCR and press POWER to turn on the VCR.  If 

necessary, press GUIDE to select the input the VCR 
is on, such as Antenna input (or line input).

2.  Press ENTER  to switch the TV to the VCR.

3.  Select the correct channel for recording on the  

VCR and then press REC to start recording.  You 

will need to manually stop the recording at the end 
of the program.  

OR...

4.  Press the DEVICE MENU button to display the 

VCR’s menu to schedule a delayed recording  
directly from antenna or cable.

To record from Ant-1, Ant-2 or other devices, see 

NetCommand Controlled Recordings.