Инструкции Пользователя для Mitsubishi Electronics WS-55859

Viewing and changing SQV banks using the 

remote control:

  Press the SQV button.

  To change memory banks, press a 

number button within 5 seconds of 
pressing the SQV button.

  Press the SQV button repeatedly to 

cycle through the channels available in 
that bank.

Adding SQV channels using the remote con-

trol:

  Use the CHANNEL or number buttons 

to select the channel you want to add to 
the current SQV memory bank.

  Press and hold the SQV button for 

about 2 seconds.  When “SQV” and the 
memory bank number appear under the 
channel number, the channel has suc-
cessfully been added.

Removing SQV channels using the remote 

control:

  Press the SQV button repeatedly until 

you see the desired channel.

  While the channel number and SQV 

indicator (with correct bank number) are 

still displayed on the screen, press the 
CANCEL button.  If the CANCEL button 

is not pressed before the SQV indicator 
disappears automatically, the channel 

will not be removed.

  When the SQV indicator disappears, the 

channel has successfully been removed 
only for that bank.  Other banks remain 
unchanged.

(Figure 1)

SQV (Super Quick View™) allows you to put 
together a list of your favorite channels from 

Ant-A, Ant-B and Ant-DTV.  You can store 

channels in each of the 9 different memory 
banks.  Also, you can store the same channel 
in multiple memory banks.  Once you have 

added a channel to the SQV memory, when 
tuned to the channel “SQV” (and the memory 
bank number) will appear under the channel 
number on the TV screen.

  Select the channel using the “Channel” 

option box or CHANNEL button.

  Use       or   to select the SQV 

Memory Bank.

  Press ENTER to check mark the 

memory bank.

  Repeat for additional channels or banks.

  Highlight the check marked box.

  Press ENTER to remove the check mark.