Инструкции Пользователя для Mitsubishi Electronics WS-55859

(Figure 2)

For the manual clock setting, select the cur-
rent time, including AM or PM and the day.

(Figure 2)

When manual has been selected for the 

clock setting, you need to set the time.  

Press   or    to slowly adjust the time.  
Press and hold   or   to quickly adjust the 

time.  Then use    to move to the “Set Day” 
option.

(Figure 2)

When Manual has been selected for the 

Clock Setting, you need to select the current 

day of the week.  Use      to select the 
correct day.

(Figure 1)

The Clock Setting of Auto will automatically 

set the day and time using Extended Data 

Service (XDS) time data.  This data is auto-

matically retrieved from a PBS channel or 
other channel carrying this service when 
received on Ant-A or Ant-B.

(Figure 1)

When Auto has been selected for the Clock 
Setting, you need to select the correct time 

zone.  Use ADJUST    or    to select the 

time zone (Atlantic, Eastern, Central, Moun-
tain, Paci c,  Alaska,  or Hawa i i) for  you r area.  

Then use ADJUST    to move to the Daylight 

Savings Time option.

(Figure 1)

When Auto has been selected for the Clock 
Setting, you need to select the Daylight Sav-

ings Time (DST) option that your state uses.  

Use Adjust    or    to select Applies if 

your state uses DST, or Ignore if your state 

or area does not use DST.  The clock time 
and day will be set automatically after tuning 
to a channel carrying the Extended Data 

Service (XDS) time data (usually your local 
PBS channel).