Справочник Пользователя для Polycom DOC2702A
Chapter 8-Address Book
Polycom, Inc.
8-11
4
Usually, additional definitions are not required and you can use the system defaults for
the remaining parameters. In such a case, click OK.
To modify the default settings for advanced parameters, click the Advanced tab.
To modify the default settings for advanced parameters, click the Advanced tab.
Endpoint Website IP
Address
(IP only)
Address
(IP only)
Enter the IP address of the endpoint’s internal site to enable
connection to it for management and configuration purposes.
This field is automatically completed the first time that the endpoint
connects to the RMX. If the field is blank it can be manually
completed by the system administrator. The field can be modified
while the endpoint is connected
connection to it for management and configuration purposes.
This field is automatically completed the first time that the endpoint
connects to the RMX. If the field is blank it can be manually
completed by the system administrator. The field can be modified
while the endpoint is connected
Audio Only
Select this check box to define the participant as a voice participant,
with no video capabilities.
with no video capabilities.
Extension/Identifier
String
String
Dial-out participants that connect to an external device such as
Cascaded Links or Recording Links may be required to enter a
conference password or an identifying string to connect. Enter the
required string as follows:
[p]…[p][string]
For example: pp4566#
p - optional - indicates a pause of one second before sending the
DTMF string. Enter several concatenated [p]s to increase the delay
before sending the string. The required delay depends on the
configuration of the external device or conference IVR system.
String - enter the required string using the digits 0-9 and the
characters * and #. The maximum number of characters that can be
entered is identical to the H.323 alias length.
If the information required to access the device/conference is
composed of several strings, for example, the conference ID and the
conference password, this information can be entered as one string,
where pauses [p] are added between the strings for the required
delays, as follows:
[p]…[p][string][p]…[p] [string]...
For example: p23pp*34p4566#
Cascaded Links or Recording Links may be required to enter a
conference password or an identifying string to connect. Enter the
required string as follows:
[p]…[p][string]
For example: pp4566#
p - optional - indicates a pause of one second before sending the
DTMF string. Enter several concatenated [p]s to increase the delay
before sending the string. The required delay depends on the
configuration of the external device or conference IVR system.
String - enter the required string using the digits 0-9 and the
characters * and #. The maximum number of characters that can be
entered is identical to the H.323 alias length.
If the information required to access the device/conference is
composed of several strings, for example, the conference ID and the
conference password, this information can be entered as one string,
where pauses [p] are added between the strings for the required
delays, as follows:
[p]…[p][string][p]…[p] [string]...
For example: p23pp*34p4566#
Extension/Identifier
String (continued)
String (continued)
The RMX automatically sends this information upon connection to the
destination device/conference. The information is sent by the RMX as
DTMF code to the destination device/conference, simulating the
standard IVR procedure.
destination device/conference. The information is sent by the RMX as
DTMF code to the destination device/conference, simulating the
standard IVR procedure.
Table 8-3
New Participant – General Properties (Continued)
Field
Description