Справочник Пользователя для Polycom DOC2702A

Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 

Polycom, Inc.

Define the following Advanced parameters:

 

Video Bit Rate / Auto
(IP Only)

The Auto check box is automatically selected to use the Line Rate 
defined for the conference.
Note: This check box cannot be cleared when defining a new 
participant during an ongoing conference.
To specify the video rate for the endpoint, clear this check box and 
then select the required video rate.

Select the video compression standard that will be forced by the MCU 
on the endpoint when connecting to the conference: H.261, H.263, 
H.264 or RTV.
Select Auto to let the MCU select the video protocol according to the 
endpoint’s capabilities.

The Auto check box is automatically selected to use the Resolution 
defined for the conference.
To specify the Resolution for the participant, select the required 
resolution from the drop-down menu.

To adjust the volume the participant broadcasts to the conference or 
the volume the participant hears the conference, move the slider; 
each unit represents an increase or decrease of 3 dB (decibel). The 
volume scale is from 1 to 10, where 1 is the weakest and 10 is the 
strongest. The default connection value is 5.

Select whether the endpoint uses encryption for its connection to the 
conference.
Auto (default setting) indicates that the endpoint will connect 
according to the conference encryption setting.