Справочник Пользователя для 2WIRE F-116P

4-25

The one-touch or speed dial location 

you tried to use has no number 

assigned to it

Dial the number manually using the 

number keypad or assign the number. 

You have attempted to set up a copy 

or fax operation with no document 

loaded.

Load a document and try again.

Your machine’s memory has become 

full while documents were being 

loaded into memory.

To cancel the fax job, press the No 

1 button Yes. If you want to send the 

pages already stored, press the No 

2 button No. You should send the 

remaining pages later when the 

memory is available.

You are doing in the Add/Cancel 

operation, but there is no jobs waiting.

Check the display to see if there is any 

scheduled job. The display should 

indicate them in standby mode, for 

example, Delay Fax.

Temperature could not reach certain 

level.

Refer to the flow chart of the fuser 
problem.

The thermistor has been disconnected.

Refer to the flow chart of the fuser 
problem.

Temperature has gone up very high 

degree.

Refer to the flow chart of the fuser 
problem.

There is no Cartridge in MFP.

Install the toner cartridge.

The cartridge is out of toner.

Replace the toner cartridge.

Toner is empty, replace or order for 

new toner.

Replace the toner cartridge.

When NON-Muratec cartridge is 
inserted in MFP.

Replace the toner cartridge.