Инструкции для IBM DCS9550 1S1

Содержание

• Preface

  3
  • Contents

    14
    • Introduction

      16
  • 1.1 The IBM System Storage DCS9550 1S1 Storage Expansion Unit

    16
    • Figure 1-1 The DCS9550 SATA Disk Chassis Model 1S1 System

      16
    • 1.1.1 Enclosure Chassis

      17
      • Figure 1-2 Enclosure Chassis (Front)

        17
      • Figure 1-3 Enclosure Chassis (Rear)

        17
• 1.2 The Plug-in Modules

  18
  • 1.2.1 Power Supply/Cooling Module

    18
    • Figure 1-4 AC Power Supply/Cooling Module

      18
  • 1.2.1.1 Multiple Power Supply/Cooling Modules

    18
  • 1.2.2 Operators Panel

    19
    • Figure 1-5 Ops Panel

      19
  • 1.2.2.1 Ops Panel Indicators and Switches

    19
    • Table 1-1 Ops Panel Switch Functions (Default settings for DCS9550 1S1 Storage Expansion UnitSCM usage at 2Gb/s)

      19
      • Off

        19
      • Off

        19
      • Off

        19
      • Off

        19
      • Off

        19
      • Off

        19
      • Off

        20
      • Off

        20
      • On

        20
      • Off

        20
      • Off

        20
      • On

        20
      • On

        20
      • On

        20
      • On

        20
      • Off

        20
      • Off

        20
      • Off

        20
      • On

        20
      • Off

        20
  • 1.2.3 SCM Input/Output Module

    20
    • Table 1-2 SCM I/O Module LEDs

      20
    • Figure 1-6 SCM I/O Module

      21
    • Figure 1-7 SCM Front Panel (as viewed from rear of Enclosure)

      22
    • Figure 1-8 DCS9550 1S1 Storage Expansion Unit with SCM I/O Modules Installed

      22
  • 1.2.4 Drive Carrier Module

    23
    • Figure 1-9 Drive Carrier Module

      23
  • 1.2.4.1 SATA Dual Path Transition Card

    23
  • 1.2.4.2 Drive Status Indicators

    23
  • 1.2.4.3 Anti-tamper Locks

    24
    • Figure 1-10 Anti-tamper Lock

      24
  • 1.2.5 Dummy Carrier Modules

    24
  • 1.2.6 Blank Modules

    24
• 1.3 Visible and Audible Alarms

  24
• 1.4 DCS9550 1S1 Storage Expansion Unit Technical Specification

  25
  • 1.4.1 Dimensions

    25
  • 1.4.2 Weight

    25
  • 1.4.3 AC Power (450W PSU)

    25
  • 1.4.4 PSU Safety and EMC Compliance

    25
  • 1.4.5 Power Cord

    25
  • 1.4.6 Environment

    26
    • Table 1-3 Ambient Temperature and Humidity

      26
      • 5C to 40C

        26
      • 20% to 80%

        26
      • non-condensing

        26
      • 23C

        26
      • 0C to +50C

        26
      • 8% to 80%

        26
      • non-condensing

        26
      • 27C

        26
      • 1C to +60C

        26
      • 8% to 80%

        26
      • non-condensing

        26
      • 29C

        26
      • -40C to +60C

        26
      • 5% to 100%

        26
      • non-precipitating

        26
      • 29C

        26
      • System must be operated with low pressure rear exhaust installation (Back pressure created by rack doors and obstacles not to exceed 5 pascals [0.5mm Water gauge])

        26
      • 0 to 2133 m (0 to 7,000ft) (10,000ft at maximum ambient of 35C)

        26
      • -305 to 12,192m (-1000 to 40,000ft)

        26
      • Vertical axis 5g peak 1/2 sine, 10ms

        26
      • 30g 10ms 1/2 sine

        26
      • 0.21grms 5-500 Hz Random

        26
      • 1.04grms 2-200 Hz Random

        26
      • 0.3g 2-200 Hz sine

        26
  • 1.4.7 Interfaces

    27
  • 1.4.8 SCM I/O Module Specification

    27
  • 1.4.9 Drive Carrier Module Specification

    27
  • 1.4.10 Software Enclosure Services (SES) Support

    28
    • Installation

      30
• 2.1 Planning Your Installation

  30
  • Table 2-1 DCS9550 1S1 Storage Expansion Unit Configuration

    30
  • Figure 2-1 Module locations

    31
  • 2.1.1 Enclosure Bay Numbering Convention

    31
• 2.2 Enclosure Installation Procedures

  32
  • 2.2.1 Pre-Requisites

    32
  • 2.2.2 Rack Mounting Rail Kit

    32
  • 2.2.2.1 Parts Check List

    32
  • 2.2.3 Chassis Installation

    32
  • 2.2.3.1 Parts Check List

    32
  • 2.2.3.2 Procedure

    33
• 2.3 Power Supply/Cooling Module Installation

  33
  • 2.3.1 Parts Check List

    33
  • 2.3.2 Power Supply/Cooling Module Procedure

    33
    • Figure 2-2 AC Power Supply/Cooling Module - Handle in Open Position

      34
    • Figure 2-3 Installing an AC Power Supply Cooling Module (1)

      34
    • Figure 2-4 Installing an AC Power Supply Cooling Module (2)

      35
• 2.4 SCM I/O Module Configurations

  35
  • 2.4.1 Internal Loop Structures

    35
• 2.5 FC-AL Interface

  35
• 2.6 Cabling the IBM System Storage DCS9550 1S1 Storage Expansion Unit

  36
  • Figure 2-5 DCS9550 1S1 Storage Expansion Unit: Unit #1 Cabling

    36
  • Figure 2-6 DCS9550 1S1 Storage Expansion Unit: Unit #2 Cabling

    37
  • Figure 2-7 IBM System Storage DCS9550 Couplet Cabling

    38
• 2.7 SCM I/O Module Installation

  38
  • 2.7.1 Procedure

    38
    • Figure 2-8 SCM Module Latch Operation

      38
    • Figure 2-9 Installing an SCM I/O Module in Bay 4

      39
• 2.8 Drive Enclosure Device Addressing

  39
  • Table 2-2 Ops Panel Switch Functions (Default settings for DCS9550 1S1 Storage Expansion Unit SCM usage at 1Gb/s)

    39
  • Notes 1 ON = switch to the left, OFF = switch to the right.

    40
    • Table 2-3 Mode 1 Drive Addressing

      40
    • Table 2-4 Drive Slot Arrangement: Enclosure Front View

      41
  • Notes 1 Drives are numbered row/column.

    41
  • 2 With only one active PSU the enclosure takes approximately 96 seconds to start all drives from Power On.

    41
  • 3 * Denotes SES drives which should always be fitted.

    41
• 2.9 Drive Carrier Configuration

  41
  • 2.9.1 Planning and Configuring Your Installation

    41
  • 2.9.1.1 System Configuration

    41
  • 2.9.1.2 Drive Configuration

    41
• 2.10 Drive Carrier Installation

  42
  • 2.10.1 Parts Check List

    42
  • 2.10.2 Procedure

    42
    • Figure 2-10 Installing a SATA Drive Carrier Module (1)

      43
    • Figure 2-11 Installing a SATA Drive Carrier Module (2)

      43
    • Figure 2-12 Installing an SATA Drive Carrier Module (3)

      44
  • 2.10.3 Dummy Carrier Modules

    44
  • 2.10.4 Engaging the Anti-tamper Locks

    44
  • 2.10.4.1 Activating the Locks

    44
    • Figure 2-13 Activating the Anti-tamper Lock

      45
• 2.11 Power Cord Connection

  45
  • 2.11.1 Parts Check List

    45
  • 2.11.2 Procedure

    45
• 2.12 Grounding Checks

  46
  • Warning If more than one product is fitted in a rack, the earth connection to the rack is even more important, because the rack will then have a high “EARTH LEAKAGE CURRENT” (“TOUCH CURRENT”).

    46
    • Operation

      48
• 3.1 Power On

  48
  • 3.1.1 Power Supply/Cooling Module LEDs

    49
    • Table 3-1 PSU LEDs

      49
• 3.2 Ops Panel LEDs

  50
  • Figure 3-1 Ops Panel LEDs and Switches

    50
  • Table 3-2 Ops Panel LED States

    50
• 3.3 Starting the Drives

  51
  • 3.3.1 Disk Drives LEDs

    51
• 3.4 Power Down

  51
• 4.1 Emulation Limitations

  52
• 4.2 Initial Start-up Problems

  52
  • 4.2.1 Faulty Cords

    52
  • 4.2.2 Alarm Sounds On Power Up

    53
  • 4.2.3 Green “Signal Good” LED on SCM Not Lit

    53
  • 4.2.4 Computer Doesn’t Recognize the DCS9550 1S1 Storage Expansion Unit

    53
• 4.3 LEDs

  53
  • 4.3.1 Power Supply/Cooling Module

    53
    • Table 4-1 PSU LEDs

      54
  • 4.3.2 Ops Panel

    54
    • Figure 4-1 Ops Panel

      54
    • Table 4-2 Ops Panel LED States

      55
  • 4.3.3 SCM I/O Module LEDs

    56
    • Table 4-3 SCM I/O Module LEDs

      56
• 4.4 Audible Alarm

  56
  • 4.4.1 Audible Alarm Mute

    56
• 4.5 Troubleshooting

  57
  • 4.5.1 System Faults

    57
    • 1 The SYSTEM LED will illuminate AMBER on the SCM

      57
    • 2 Audible Alarm sound

      57
    • 1 Check for other AMBER LED indications on the Power Supply/Cooling modules. If there is a PSU error present there may be a comm...

      57
    • 2 Check for other AMBER LED indications on the drive carriers. If none are evident then there may either be an ESI processor problem or a Backplane problem.

      57
    • 3 Ops Panel module faulty. Please contact your supplier.

      57
  • 4.5.2 Power Supply/Cooling Faults

    57
    • 1 Ops Panel FAULT LED AMBER

      57
    • 2 An AMBER LED on one or more Power Supply/Cooling Modules.

      57
    • 3 Audible Alarm Sounding.

      57
    • 1 Any power fault.

      57
    • 2 A fan failure.

      57
    • 3 A thermal condition which could cause PSU overheating.

      57
    • 1 Check Power On/Off Switch on rear of Power Supply/Cooling module is switched ON.(not accessible on later models)

      57
    • 2 Check AC Mains Connections to Power Supply/ Cooling module is live.

      57
    • 3 Disconnect the Power Supply/Cooling module from mains power and remove the module from the system. Re-install: if problem persists, replace Power Supply/Cooling Module.

      57
    • 4 Reduce the ambient temperature.

      57
  • 4.5.3 Thermal Control

    58
    • 1 Check the installation for any airflow restrictions at either the front or rear of the enclosure. A minimum gap of 25mm at the front and 50mm at the rear is recommended.

      58
    • 2 Check for restrictions due to dust build-up; clean as appropriate.

      58
    • 3 Check for excessive re-circulation of heated air from rear to the front, use in a fully enclosed rack installation is not recommended.

      58
    • 4 Check that all Blank modules are in place.

      58
    • 5 Reduce the ambient temperature.

      58
  • 4.5.4 Thermal Alarm

    59
    • 1 Ops Panel FAULT LED AMBER.

      59
    • 2 An AMBER LED on one or more Power Supply/Cooling Modules.

      59
    • 3 Audible Alarm Sounding.

      59
    • 4 Air temperature exiting PSU above 55C.

      59
    • 1 Check local ambient environment temperature is below the upper 40C specification.

      59
    • 2 Check the installation for any airflow restrictions at either the front or rear of the enclosure. A minimum gap of 25mm at the front and 50mm at the rear is recommended.

      59
    • 3 Check for restrictions due to dust build-up, clean as appropriate.

      59
    • 4 Check for excessive re-circulation of heated air from rear to the front, use in a fully enclosed rack installation is not recommended.

      59
    • 5 If possible shutdown the enclosure and investigate the problem before continuing.

      59
  • 4.5.5 Thermal Shutdown

    59
• 4.6 Drive Carrier Module Faults

  59
  • Table 4-4 LED Functions

    59
  • 4.6.1 Dummy Carrier Modules

    60
• 4.7 Dealing with Hardware Faults

  60
• 4.8 Continuous Operation During Replacement

  60
• 4.9 Replacing a Module

  60
  • 4.9.1 Power Supply/Cooling Modules

    61
  • 4.9.1.1 Removing a Power Supply/Cooling Module

    61
  • 4.9.1.2 Inserting the Module

    61
    • Figure 4-2 Removing/Inserting an AC Power Supply/Cooling Module (1)

      62
    • Figure 4-3 Removing/Inserting an AC Power Supply/Cooling Module (2)

      62
    • Figure 4-4 Removing/Inserting an AC Power Supply/Cooling Module (3)

      63
  • 4.9.2 Ops Panel

    63
  • 4.9.3 SCM I/O Module

    63
  • 4.9.3.1 Removing the Module

    63
    • Figure 4-5 Removing an SCM I/O Module (1)

      64
    • Figure 4-6 Removing an SCM I/O Module (2)

      64
  • 4.9.3.2 Inserting the Module

    65
    • Figure 4-7 SCM I/O Module Latch Operation

      65
  • 4.9.4 Drive Carrier Module

    65
  • 4.9.4.1 Removal and Replacement

    65
• 4.10 Spare Parts and Ancillary Items

  66
  • Glossary

    68
    • ASCII

      68
    • ATA

      68
    • (Advance Technology Attachment)

      68
    • Attribute

      68
    • Backplane

      68
    • Bay

      68
    • Byte

      68
    • Cable

      68
    • Character

      68
    • Characters Per Second

      68
    • Chassis

      68
    • Configure

      68
    • Data Communications

      68
    • Disk (drive, carrier, module)

      68
    • Enclosure

      69
    • ESI/Ops module

      69
    • Hot plugging

      69
    • Hot swap

      69
    • Hz (Hertz)

      69
    • Initialize

      69
    • LED

      69
    • Module (power supply, drive, I/O)

      69
    • Operating system

      69
    • Parallel Transmission

      69
    • Power Cord

      69
    • Protocol

      69
    • Redundant

      69
    • SCM I/O module (Serial ATA Control I/O module)

      69
    • Serial Transmission

      69
  • Index

    70
    • a

      70
    • b

      70
    • c

      70
    • d

      70
    • e

      70
    • f

      70
    • l

      70
    • o

      70
    • p

      70
    • r

      70
    • s

      70
    • v

      71
• Notices

  72
• Readers Comments

  76