Инструкции для SSI America BINARY SOLVENT DELIVERY MODULE 90-2581 REV B

Содержание

• 1. INTRODUCTION

  3
  • 1.1 Description of the Binary Solvent Delivery Module

    3
    • 1.1.1 Pump Features

      4
    • 1.1.2 Wetted Pump Materials

      5
    • 1.1.3 Self-Flushing Pump Head

      5
    • Self-Flush and Seal Life

      6
  • 1.2 Specifications for the Binary Solvent Delivery Modules

    7
• 2. INSTALLATION

  8
  • 2.1 Unpacking and Inspection

    8
  • 2.2 Location/Environment

    8
  • Fluid Connections & Priming

    8
  • There are only four connections to be made.

    8
  • 2.5 Solvent Preparation

    10
    • 2.5.1 Solvent Out-gassing and Sparging

      10
    • 2.5.2 Cavitation

      11
    • 2.5.3 Filtration

      11
    • 2.5.4 Initial system pressurization (Daily)

      11
  • 2.6 Instrument Installation

    11
    • 2.6.1 Mobile Phase Reservoirs

      11
    • 2.6.2 Self-Flush Solution

      12
    • 2.6.3 Inlet Tubing and Filters

      12
    • 2.6.4 Priming the Pump and the Flushing Lines

      12
    • 2.6.6 Long Term Pressure Calibration Accuracy

      12
  • 2.7 Preparation for Storage or Shipping

    13
    • 2.7.1 Isopropanol Flush

      13
    • 2.7.2 Packaging for Shipping

      13
• 3. OPERATION

  14
  • 3.1 Pump Front Panel Controls and Indicators

    14
    • 3.1.1 Control Panel

      14
      • 3.1.1.1 Digital Display

        14
      • Power-up Configuration

        15
      • 3.1.1.5 Power-Up Tests

        15
  • 3.5 Rear Panel Remote Input

    16
    • See Appendix A for details on connection and operation.

      16
  • 3.6 Symbols

    16
• 4. THEORY OF OPERATION

  17
  • 4.1 Pump Mechanical Operation

    17
    • 4.1.1 Liquid System Flow Path

      17
    • 4.1.2 Pump Cycle

      17
  • 4.2 Electronic Control

    18
    • 4.2.1 Microprocessor Control

      18
    • 4.2.2 DC Power Supply

      18
    • 4.2.3 Remote Interfacing

      18
• 5. MAINTENANCE

  20
  • 5.1 Filter Replacement

    20
    • 5.1.1 Inlet Filters

      20
  • 5.2 Changing Pump Heads

    20
    • 5.2.1 Removing a Pump Head

      20
    • 5.2.2 Cleaning the Pump Head Assembly

      24
    • 5.2.3 Replacing Piston Seals

      26
      • 5.2.3.1 Removing the Seals

        27
      • 5.2.3.2 Cleaning the Piston

        27
      • 5.2.3.3 Replacing the Seals

        27
    • 5.2.4 Changing the Piston

      28
  • 5.3 Conditioning New Seals

    29
  • 5.4 Check Valve Cleaning and Replacement

    30
  • 5.5 Pulse Damper Replacement

    30
    • 5.5.1 Removing the Pulse Damper

      30
    • 5.5.2 Pulse Damper Refurbishing

      30
    • 5.5.3 Pulse Damper Installation

      31
  • 5.6 Cleaning the Pump

    31
  • 5.7 Lubrication

    32
  • 5.10 Battery Replacement (If applicable) See attached pho

    35
• 6. PROBLEM SOLVING

  36
• 7. LIST OF REPLACEMENT PARTS

  37
  • BINARY, STAINLESS STEEL

    37
    • BINARY, PEEK

      38
• APPENDIX A

  39
  • A.1 Rear Panel Serial Communications Port - Pump

    39
    • A.1.1 Hardware Implementation

      39
    • A.1.2 Hand-Shaking

      39
    • A.1.3 Command Interpreter

      40
  • A.2 Pump Rear Panel 4-Pin and 10-Pin Terminal Board Connecto

    42
    • A.2.1 Pressure Fault and Motor Stall Fault Output

      42
    • A.2.2 General Information on Inputs

      43
    • A.2.3 General Information on Run, Stop, and Enable Inputs

      44
    • A.2.4 Run and Stop Inputs

      44
    • A.2.4 Enable Input

      45
    • A.2.5 General Information on Voltage and Frequency Inputs

      45
• APPENDIX B

  46