Teledyne Percent Oxygen Analyzer 用户手册

 

28 

The receptacle for the probe cable is located in the lower left-hand 

corner of the rear panel. The 6-pin polarized connector is keyed to fit 
only one way into the receptacle. Do not force it in. The other end of the 
cable connects to the probe assembly. See Figure 3-5. Connect the probe 
lead as shown in Figure 3-4 . The heater connector is on the right-hand 
corner of the rear panel.  Six foot long cables are provided for the 
remote probe and the heater. Their Teledyne Analytical Instruments part 
numbers are listed on the spare parts list located in the appendix.