Konica Minolta VI-300 用户手册

107

File
Menu

File – Import – Digitizer – Step Scan (When VIVID 700 is Selected)

•  To set the scan reference position (Distance) and 

laser intensity (Laser Intensity), perform the fol-
lowing procedure.

q

 Check the [Option] checkbox.

w

 Check the [Manual] checkbox.

e

 Move the Distance bar or Laser Intensity bar to 

the desired position.

•  If you are not going to scan both color and range 

images at the same time, uncheck the [Auto read] 
checkbox.

Check the [Option] checkbox, and make nec-
essary parameters.

Scan will start, and both color and range im-
ages will be displayed.
The “Next shot? (angle:**)” message dialog 
box will also appear.

•  If the color and range images are not scanned at 

the same time, clicking the [Read] button will 
capture a color image and display it.

•  If the type of rotating stage has not been desig-

nated, turn the rotating stage manually to the next 
angle displayed in the “Next shot? (angle:**)] 
message dialog box.

The next specified angle will appear in [Current 
Angle],
and the object will be scanned for the next 
image.

•  If a rotating stage has been selected by the Turn-

table, the stage will turn to the next angle and 
then the object will be scanned.

•  To cancel scan, click the [Cancel] button instead 

of the [OK] button, and repeat steps 4 to 6.

angles are captured.
When shots from all the desired angles are 
captured,
the “Next shot? Please set the chart.” mes-
sage dialog box will appear.

•  If you want to acquire a shot from a certain angle 

again, click the angle currently displayed in [Cur-
rent Angle] with the left mouse button, then select 
the desired angle from the pull-down menu that 
appears.

If an angle (rotation step) has been selected at step 3, 
necessary steps (angles) to complete 360 degrees will 
be displayed in the pull-down menu. However, it is not 
necessary to scan at all the angles. You can select neces-
sary steps (angles) only.