Konica Minolta VI-300 用户手册

109

File
Menu

File – Import – Digitizer – Step Scan (When VIVID 700 is Selected)

•  Select the desired rate from “1/1”, “1/4”, “1/9”, 

“1/16” and “No polygon” by selecting from the 
[Reduction Rate] pull-down menu.

•  If you want to generate points to fill in holes 

caused by missing data, set the [File Holes] set-
ting to “On”.

•  The [Remove] pull-down menu lets you select 

which points to remove from the imported data.

   You can set this to any of the following: “None”, 

“Boundary(B.)”, “5deg. & B.”, “10deg. & B.”, 
“15deg. & B.”, or “20deg. & B.”

•  If you want to filter the imported data, select the 

appropriate parameter from the [Filter] pull-down 
menu.

•  To save the raw scan data (.cam) when importing 

data, check the [Save camera data] checkbox.

Each scanned image will be subjected to reg-
istration and displayed, and the “Proceed to 
registration?” message dialog box will appear.
The element list will also show the element 
name specified at step 12 plus “rotation step”. 
The element name is highlighted, indicating 
that it is currently selected.

•  The loaded data will be ready to be displayed in 

all windows. It will be displayed in the active 
window

 and the windows for which all the ele-

ments are set to be displayed.

•  When the data is loaded for the first time after 

the software is started, it will be fully framed in 
all the windows including those that are hidden 
automatically.

•  If a rotating stage has been designated, the rotat-

ing stage will rotate back to the original position 
before data reading starts.

•  If the [Save camera data] checkbox was checked 

at step 12, the [Remote-Save] dialog box will ap-
pear before the one that asks whether you want to 
perform fine-registration.

q

 Enter the desired file name.

w

 Click the [Save] button.

Fine-registration will be performed and the 
data will be displayed again.

•  If a rotating stage has been selected by the Turn-

table, the stage will turn to the next angle and 
then scan will be performed.

•  If you are not going to perform fine-registration, 

click the [Cancel] button instead of the [OK] button.

Fine-registration can be cancelled even if it has started, by 
clicking the [Cancel] button in the dialog box that appears 
during fine-registration.