Konica Minolta VI-300 用户手册
111
Chapter
2
File
Menu
Menu
700
File – Import – Digitizer – PC Card (When VIVID 700 is Selected)
Importing Data from the Memory Card of VIVID 700
This command is used to remote-control the data stored in the memory card of the VIVID 700 (VI-700).
Note
This command does not operate on step-scan scan data
in the memory card.
Parameters for [File-Import-Digitizer-PC Card] Dialog Box
File name
Displays file names stored in the memory card.
Date
Displays the dates on which the files are stored in the memory card.
Size
Displays the size of each file (in bytes).
Total
** files
Displays the total number of camera data files stored in the memory card.
** MB/ ** MB
Displays the unoccupied capacity and total capacity of the memory card.
M
emo
Before performing the procedure below, make sure that
the digitizer you are going to use is selected by the File
– Select Digitizer command.
the digitizer you are going to use is selected by the File
– Select Digitizer command.
Ref. For details of the File – Select Digitizer command,
refer to page 144.
Operating Procedure
1
From the [File] menu, select [Import],
[Digitizer] and then [PC Card].
The [File-Import-Digitizer-PC Card] dialog box
will appear.
will appear.
M
emo
Upper-case file names specified using the camera will
be converted to lower-case file names when the files are
imported to this software.
be converted to lower-case file names when the files are
imported to this software.
2
Select the file you want to import.
• To display the preview image, check the [Preview
Image] checkbox (so that a check mark appears in
the check box). A color image of the selected file
will be displayed.
the check box). A color image of the selected file
will be displayed.
M
emo
A clock icon will be displayed during loading.