A&D EJ-2000 用户手册

“Title block” and “End block”

When a weight value is recorded as the GLP data, “Title block” and “End block” are

added at a group of weight values in the GLP report.

To output the GLP report to the printer AD-8121B , use MODE 3 of it.

1. With the weight data displayed, press and hold the PRINT key until start is

displayed. Then, the balance outputs the “Title block”.

2. The balance can output the weighing data by pressing the PRINT key or

selecting the auto-print mode.

3. Press and hold the PRINT key until recend is displayed. Then, the balance

outputs the “End block” and shows end .

4. Press the UNITS key to return to the normal weighing mode.

AD-8121 format “info 1”

General format “info 2”

:Space,

ASCII

20h

CR :Carriage return, ASCII 0Dh

LF :Line feed, ASCII 04Ah

10-3. Calibration test using a weight

Calibration test is to confirm the weighing accuracy using a weight and output the

results as GLP report.

Set the function setting “info 1” or “info 2” to perform the calibration test.

Calibration test does not perform actual calibration but is only to test.

1. Press and hold the calibration (CAL) switch.

CC appears after Cal . Release the

switch when CC is displayed.

Pressing and holding the SAMPLE and PRINT
keys will also display CC .

Release the CAL switch.

           A & D
MODEL     EJ-300
S/N      1234567
ID        ABCDEF
DATE    09/03/22
01:23:45 PM

WT    +123.45  g
WT    +213.43  g
WT    +312.44  g
WT    +321.42  g

END
01:23:56 PM
SIGNATURE

- - - - - - - -

~~~~~~~~~~~

D<CRLF>

MODEL

~~~~~

EJ-610<CRLF>

S/N

~~~~~~

1234567<CRLF>

~~~~~~~~

ABCDEF<CRLF>

DATE<CRLF>
<CRLF>
START<CRLF>
TIME<CRLF>
<CRLF>
<CRLF>
WT

~~~~

+123.45

g<CRLF>

~~~~

+213.43

g<CRLF>

~~~~

+312.44

g<CRLF>

~~~~

+321.42

g<CRLF>

<CRLF>
END<CRLF>
TIME<CRLF>
<CRLF>
SIGNATURE<CRLF>
<CRLF>
<CRLF>
-

<CRLF>

Manufacturer

Model

Serial number

ID number

Date

Start time

Signature

Weight data

End time

End

block

Title

block