Motorola CDMA 800/1900 MHz 用户手册
20
May 15, 2006
6809495A97-O
Disassembly
Q CDMA
Removing and Replacing the Battery
1.
Ensure the phone is turned off.
2.
Remove the battery cover as described in the procedures.
3.
Lift up the edge of the battery near the side of the phone, as shown in Figure 7.
4.
Lift the battery out of the phone.
5.
To replace, align the battery with the battery compartment so the contacts on
the battery match the battery contacts in the phone.
the battery match the battery contacts in the phone.
6.
Insert the left edge of the battery into the battery compartment.
7.
Lower the right edge of the battery into the battery compartment until the
battery is completely seated.
battery is completely seated.
8.
Replace the battery door as described in the procedures.
E
All batteries can cause property damage and/or bodily injury, such as burns if a
conductive material, such as jewelry, keys, or beaded chains touch exposed termi-
nals. The conductive material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal objects.
conductive material, such as jewelry, keys, or beaded chains touch exposed termi-
nals. The conductive material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal objects.
060173o
Figure 7. Removing the Battery
Battery