Motorola CDMA 800/1900 MHz 用户手册

3.

Insert the disassembly tool between the front and rear housings and rotate it 
at the places indicated (as shown in Figure 9) to release the housing snaps. 
Press on the front housing and then pull the front and rear housings apart.

4.

Lift the top end of the rear housing, and then the bottom end away from the 
phone.

5.

To replace, align the rear housing to the phone.

6.

Carefully press the rear housing onto the phone until all the housing snaps are 
fully engaged. 

7.

Insert 6 T6 screws into the rear housing assembly and tighten to 14 Ncm 
(1.25 inch-pounds).

8.

Replace the battery and battery door as described in the procedures.

060195o

Disassembly tool

Rear housing