Roland AR-200 用户手册
44
Controlling the AR-200 with MIDI Signals (MIDI control)
AR-200 Settings
MIDI Receive channel Settings (MIDI
channel)
channel)
This sets the MIDI receive channel. MIDI allows you to
independently control two or more devices over a single
MIDI cable. For example, when the MIDI channel for the
sending device is set to “1,” then unless the MIDI channel of
the receiving device (here, the AR-200) is also set to “1,” the
MIDI message is not transmitted.
independently control two or more devices over a single
MIDI cable. For example, when the MIDI channel for the
sending device is set to “1,” then unless the MIDI channel of
the receiving device (here, the AR-200) is also set to “1,” the
MIDI message is not transmitted.
Off : MIDI messages will not playback phrases.
1-16: Only the MIDI messages on the selected channel are
received and played back.
received and played back.
All : MIDI messages of any channel will playback phrases.
With cards formatted on the AR-2000, you can check the
MIDI reception channel settings, but they cannot be changed.
MIDI reception channel settings, but they cannot be changed.
Procedure for Making the MIDI Receive
Channel Settings
Channel Settings
1.
While holding down the PLAY button, insert the card
into the card slot.
into the card slot.
The MIDI indicator will blink, and the display will indicate
the receive channel.
the receive channel.
2.
Press the [
]/[
] dial to select the MIDI Receive
channel (OFF/1-16/ALL).
3.
Press the PLAY button to set the specified MIDI receive
channel.
channel.
The MIDI indicator lights, and the phrase number is
displayed.
displayed.
• If you press the STOP button, the MIDI receive channel
setting will be canceled.
MIDI Control Signals That Can Be
Received (Receive Messages)
Received (Receive Messages)
If you use a card whose settings have been made on the AR-
3000, the following MIDI message can be received by the AR-
200.
3000, the following MIDI message can be received by the AR-
200.
Note On Velocity:
Volume level when playback of the
phrase starts
Panpot (CC10):
Changes the positioning of the sound in
the left and right channels
Expression (CC11): Changes the master volume
For more a detailed explanation of MIDI, refer to
"MIDI
Implementation"
and
"MIDI Implementation Chart"
MIDI Note Out
Moreover, by using an optional AR-3000 to create and edit
phrases, the following function are also possible.
phrases, the following function are also possible.
For detailed information, please refer to the AR-3000 user’s
manual.
manual.
If MIDI Note Out is set to “ON,” then when an audio phrase
is played back, the MIDI Note Number On/Off signals set in
is played back, the MIDI Note Number On/Off signals set in
"MIDI Note Map"
(p. 43) are output from the MIDI OUT
connector.
In this case, if two or more note numbers have been assigned
to that playback phrase, only the lowest note number will be
transmitted.
to that playback phrase, only the lowest note number will be
transmitted.
The MIDI signals are output through the channel set through
the MIDI Receive channel.
the MIDI Receive channel.
If the MIDI Receive channel is set to :
“OFF”:
There is no output
“1-16”:
Only the MIDI signals in the selected channel
are input and output
“ALL”:
Output is through Channel 1
* If you are using Note messages to control two or more AR-200
units, set the MIDI Note Trigger setting of the slave AR-200
units to “Trig.””Trigger” is selected when the card is
formatted. However, this setting cannot be changed on the
AR-200.
units to “Trig.””Trigger” is selected when the card is
formatted. However, this setting cannot be changed on the
AR-200.
* Even when playing back MIDI phrases, Note Number On/Off
signals are not output.
AR-200_e.book 44 ページ ２００３年７月１４日 月曜日 午後１時１１分