Roland AR-200 用户手册

Synchronized Recording and Playback with Multiple AR Units (AR-LINK)

AR-200 Settings

Selecting the AR-200’s Operation (AR-
LINK SLAVE)

Set the AR-2000 so as to enable synchronization with AR-
LINK.

The AR-200 can only be set to AR-LINK slave.

Settings Procedure

Turn off the power of the AR-200.

Set the MODE switches on the AR-200’s bottom panel as
shown below.

SW4: ON

Turn on the power of the AR-200.

The SLAVE indicator on the front panel lights up.

* Use a pointed object to change the ON/OFF settings of the

MODE switches.

* For more detailed information about synchronized operation

with AR-LINK, refer to the AR-3000 Owner’s Manual.

AR-200_e.book 46 ページ２００３年７月１４日　月曜日　午後１時１１分