Roland R-26 用户手册

This diagram describes the procedure for recording on the R-26.

Select the REC MODE

Select the number of channels you’ll be recording (p. 31).

Select the REC SOURCE

Select either the internal mics, analog input, plug-in mics, or a combination of these (p. 
31).

Set the SAMPLE RATE

Select the sampling rate (p. 33).

Select the project’s format

Select WAV, MP3, or simultaneous recording of both (p. 33).

Make settings for the input

Perform the settings for the limiter, low-cut filter, phantom power, etc.

Adjust the input sensitivity and input level

Adjust the loudness of the sound you’ll be recording (p. 43). Press the [SENS] button, and 
use the input sensitivity setting screen to adjust the sensitivity. After you’ve adjusted 
the input sensitivity, use the [INPUT 1] knob and [INPUT 2] knob to adjust the input 
level.

Start recording

Stop recording

Play back the project you’ve recorded

Recording