Roland AR-3000R 用户手册
40
Recording Audio
Recording Units—Phrases
A single item of data recorded from the point where you start recording
until the point where you stop recording is called a phrase. Audio data and
MIDI data are both handled as phrases. Phrases are managed by phrase
numbers.
until the point where you stop recording is called a phrase. Audio data and
MIDI data are both handled as phrases. Phrases are managed by phrase
numbers.
fig.09-g01e
Connecting Equipment
The AR-3000R has a Mic jack on the front and an Analog Line In jack(LINE
IN) and a Digital In jack(DIGITAL IN) on the back. Make the connections as
appropriate for the equipment being used for recording.
IN) and a Digital In jack(DIGITAL IN) on the back. Make the connections as
appropriate for the equipment being used for recording.
You can also use the Mic jack and the Line In jack (analog only) at the same
time. When you do this, it’s possible to mix the Mic and Line In (analog)
input.
time. When you do this, it’s possible to mix the Mic and Line In (analog)
input.
fig.09-01e (Connections for Recording)
* Howling could be produced depending on the location of microphones relative to
speakers. This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
MIDI Phrases
→ p. 82
Phrase Number
Phrase Name
You cannot use the Mic and
Digital In jacks at the same
time.
Digital In jacks at the same
time.
Sound Recording Device
OUT (DIGITAL)
IN (DIGITAL)
OUT (ANALOG)
IN (ANALOG)
Powered Speaker
For monitor
Microphone
CF Card
Headphone
CompactFlash™
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
983
AR-3000R_e.book 40 ページ ２０１０年３月１８日 木曜日 午後２時６分