Roland AR-3000R 用户手册

Recording Audio

Basic Operations

Monitor Output During Recording and Recording Standby

Audio input from the

Mic jack and the Digital In jack

is output from the

Balanced Output jacks, Headphone jack, and Mono Out port only during
recording or recording standby, and you can monitor the recording state.

Audio input from the

Line In jacks

can be output from the Balanced Output

jacks, Headphone jack, and Mono Out port during recording or recording
standby, or even during ordinary playback.

* Audio input from the

Mic jack and the Digital In jack

cannot be output to the

Balanced Output

jacks, Headphone jack, and Mono Out port during playback.

The quality of sounds output from the audio output jack differs from that of
RDAC-Grade or RDAC-Mode sound quality. Be sure to play back the
phrase after recording to confirm the quality of the content.

Procedure for Recording

Important! Cards in AR-2000 format cannot be used.

If a card in AR-2000 format is inserted in either slot A or B (or both), the AR-
3000R can be used only for playback, and it is not possible to record phrases
or make any settings (except for card conversion and card format). Also, if
you insert a card in AR-2000 format into slot A or B (or both) while making
settings (except for card conversion and card format), the operation will halt
with an error message. Thereafter, the operation cannot be resumed until all
cards are removed. To record or edit cards in AR-2000 format on the AR-
3000R, follow the steps in “Card Convert” (p. 78).

Enabling Recording Standby

Make the correct connections, then turn on the power switch.

Recording Standby

Insert a formatted card(p. 31) into one of the slots.

Turn the SELECT dial to choose the phrase number you want
to record.

To switch between card slots A and B, press the SELECT dial.

* You cannot change the phrase number after recording, so be sure to select the phrase

number you want to record.

Line Thru Settings

→ p.

125

Turning the Power On and
Off