Roland AR-3000R 用户手册

下载
页码 152
 
90
Controlling the AR-3000R from an External Device
 
Connecting External Equipment
 
Ports Used in Program Playback
 
“START”: Plays back phrases in the order set in program 
playback.
“STOP”: This stops phrase playback.
“INC” (Increment): Advances through the program playback 
order.
“DEC” (Decrement): Goes back through the previous phrases 
in the program playback order.
“EXCHANGE”: Advances through the cycle of the Programs 
1 through 5 (1-2-3-4-5-1-2...). In this case, playback begins 
from the first phrase selected in the program to which you 
have switched.
 
* If no settings are made for Programs 2 through 5, playback 
begins from the first phrase set in Program 1.
 
Set to “ON” by shorting the above-mentioned port and 
“COM (common).”
 
fig.14-16e
 
Turning the Power On and Off 
 
 
 
Operational Specifications for 
Program Playback
 
When a one-shot control signal is input from a timer or 
similar device, a single registered phrase is played back.
 
* If there is no registered phrase saved, the next registered 
phrase is played back.
 
When consecutive signals are input, phrases are played back 
in succession in the order registered in the program.
 
fig.14-17e
 
Playback:
 
Input a control signal to the START port.
 
 
 Phrases are played back in accord with the registered 
program playback order.
 
Stop:
 
Input a control signal to the STOP port.
 
 
 This stops phrase playback.
 
Advancing in the Playback Sequence:
 
Input a control signal to the INC (Increment) port.
 
 
 This advances through the program playback order one 
phrase at a time.
 
Going Through the Playback Sequence in Reverse 
Order:
 
Input a control signal to the DEC (Decrement) port.
 
 
 This causes the phrases to go back through the program 
playback order one phrase at a time.
 
Advancing Through Programs 1 Through 5:
 
Input a control signal to the EXCHANGE port.
 
 
 This advances through Programs 1 Through 5 (1-2-3-4-5-1-
2-...).
Playback begins from the first phrase selected in the program 
to which you have switched.
 
* If no settings are made in Programs 2 through 5, playback 
begins from the first phrase set in Program 1.
 
During phrase playback, even when a new START signal is 
input, it is disregarded.
 
fig.14-18e
 
If input of START signals continues when the end of the last 
phrase in Program 1 is reached, playback then continues 
with the first phrase in Program 1. To advance to Program 2, 
input a control signal to the “EXCHANGE” port.
Stop
Playback
Advance the phrase sequence by one
Make the phrase sequence go back by one
Advance the program sequence by one
Common port
AUDIO OUTPUT
START Port
No.001
No.002
No.003
AUDIO OUTPUT
START Port
STOP Port
No. 001
No. 002
No. 001 Interrupted
AUDIO OUTPUT
START Port
No. 001
Disabled
AR-3000R_e.book 90 ページ 2010年3月18日 木曜日 午後2時6分