Whirlpool W10388779A-SP 用户手册

Venting systems come in many varieties. Select the type best 

for your installation. Two close-clearance installations are shown. 

Refer to the manufacturer’s instructions.

Exhaust vent must be securely fastened to a noncombustible 

portion of mobile home and must not terminate beneath the 

mobile home. Terminate exhaust vent outside. 

Moblie Home Exhaust installation

A

B

  

 

 

A. Over-the-top installation  

 

 

 

    (also available with one offset elbow) 

 

 

 

B. Periscope installation

NOTE: The following kits for close clearance alternate 

installations are available for purchase. Contact your local dealer.

Over-the-Top Installation: 

 

■

Part Number 4396028

Periscope Installation (For use with dryer vent to wall vent 

 

■

mismatch): 

Part Number 4396037 - 0" (0 mm) to 18" (460 mm) mismatch

         Part Number 4396011 - 18" (460 mm) to 29" (737 mm)  

mismatch

       Part Number 4396014 - 29" (737 mm) to 50" (1270 mm)  

 

 mismatch

Use following Vent System Chart to determine type of vent 

 

■

material and hood combinations acceptable to use.

NOTE: Do not use vent runs longer than those specified  

in Vent System Chart. Exhaust systems longer than those 

specified will:

Shorten life of dryer.

 

■

Reduce performance, resulting in longer drying times  

 

■

and increased energy usage.

64 ft. (20 m)

54 ft. (16.5 m)

44 ft. (13.4 m)

35 ft. (10.7 m)

27 ft. (8.2 m)

58 ft. (17.7 m)

48 ft. (14.6 m)

38 ft. (11.6 m)

29 ft. (8.8 m)

21 ft. (6.4 m)

The Vent System Charts provide venting requirements that 

will help achieve best drying performance.

NOTE: Bottom exhaust installations have a 90° turn inside the 

dryer. To determine maximum exhaust length, add one 90° turn 

to the charts.

100 ft. (30.5 m)

90 ft. (27.4 m)

80 ft. (24.4 m)

71 ft. (21.6 m)

63 ft. (19.2 m)

94 ft. (28.7 m)

84 ft. (25.6 m)

74 ft. (22.6 m)

65 ft. (19.8 m)

57 ft. (17.4 m)

Select route that will provide straightest and most direct  

 

■

path outdoors.

Plan installation to use fewest number of elbows and turns.

 

■

When using elbows or making turns, allow as much room  

 

■

as possible.

Bend vent gradually to avoid kinking.

 

■

Use as few 90° turns as possible.

 

■