Ricoh Caplio RX 用户手册
35
2
If the camera cannot automatically focus,
the crosshairs in the center of the LCD
monitor turn red and the auto-focus lamp
in the lower left of the viewfinder blinks in
green.
the crosshairs in the center of the LCD
monitor turn red and the auto-focus lamp
in the lower left of the viewfinder blinks in
green.
• When the grid appears, the crosshairs do
not appear in the middle of the LCD moni-
tor. With the auto focus lamp, check that
the shot is in focus.
tor. With the auto focus lamp, check that
the shot is in focus.
• There is another shooting method, which is
to fully press the shutter once, without
using the half-press method. Full-press
shooting is good for capturing the moment.
However, you cannot check that your shot
is in focus while shooting. (see P.36)
using the half-press method. Full-press
shooting is good for capturing the moment.
However, you cannot check that your shot
is in focus while shooting. (see P.36)
• You can use the battery for a longer period
of time by using the viewfinder and shoot-
ing in power-save mode (see P.110). In this
mode, however, you cannot check the
focus on the LCD monitor. Instead,
observe the auto focus lamp (in the lower
left of the viewfinder), which lights up in
green when the shot is in focus. The range
visible through the viewfinder and that
being shot may deviate a little bit, depend-
ing on the shooting distance. To check the
focusing or the shooting range accurately
before shooting, please use the LCD moni-
tor.
ing in power-save mode (see P.110). In this
mode, however, you cannot check the
focus on the LCD monitor. Instead,
observe the auto focus lamp (in the lower
left of the viewfinder), which lights up in
green when the shot is in focus. The range
visible through the viewfinder and that
being shot may deviate a little bit, depend-
ing on the shooting distance. To check the
focusing or the shooting range accurately
before shooting, please use the LCD moni-
tor.
If the subject is not centered on your compo-
sition, see P.xx.
sition, see P.xx.
Shooting Still Images
Use the Shooting Mode to take your still
images.
There are two methods of using the shutter
button, pressing the shutter in two stages
(half-press) and pressing it all the way down
at once (full-press). When you use half-
press, you can confirm that your shot is in
focus on the LCD Monitor. When you want to
capture the moment, full-press is convenient.
images.
There are two methods of using the shutter
button, pressing the shutter in two stages
(half-press) and pressing it all the way down
at once (full-press). When you use half-
press, you can confirm that your shot is in
focus on the LCD Monitor. When you want to
capture the moment, full-press is convenient.
Checking the Focus and Shooting
(Half-press)
1.
Turn the Mode Dial to 5
5
5
5(Shoot-
ing Mode).
2.
Compose your shot either by
looking through the Viewfinder
looking through the Viewfinder
or at the LCD Monitor.
3.
Put the subject of your photo
right in the center and press the
shutter button half-way.
right in the center and press the
shutter button half-way.
The f-stop (aperture size) and shutter
speed are displayed in the bottom part of
the screen, and the camera focuses.
speed are displayed in the bottom part of
the screen, and the camera focuses.
Color of
crosshairs
crosshairs
Auto focus lamp
Before focusing
White
Off
Focused
Green
On (green)
Failed to focus
Red xxx
Blink (green)
Auto focus lamp
Crosshair