Ricoh Caplio RX 用户手册
36
2
Once the shot is in focus, the exposure
and white balance are fixed and the
crosshair in the center of the LCD Moni-
tor turns green, as does the auto-focus
lamp in the lower left of the Viewfinder.
Check one of these to make sure the
subject is in focus.
and white balance are fixed and the
crosshair in the center of the LCD Moni-
tor turns green, as does the auto-focus
lamp in the lower left of the Viewfinder.
Check one of these to make sure the
subject is in focus.
4.
Gently press the shutter button
all the way.
all the way.
The still image you have taken freezes
for a moment on the LCD Monitor and is
recorded.
for a moment on the LCD Monitor and is
recorded.
• To prevent blurring, press the shutter
release button gently.
• The
mark indicates that blurring may
occur. Secure the camera firmly and adjust
the focus again.
the focus again.
• When shooting in a dark place, the AF aux-
iliary lamp may flash to raise the focusing
performance. If the flash is switched to off,
the AF auxiliary lamp does not flash.
performance. If the flash is switched to off,
the AF auxiliary lamp does not flash.
• When the image confirmation time is set to
OFF, the still image you have taken does
not appear on the LCD Monitor. See P.107.
not appear on the LCD Monitor. See P.107.
Capturing the Moment Shooting
(Full-press)
1.
Turn the Mode Dial to 5
5
5
5 (Shoot-
ing Mode).
2.
Compose your shot either by
looking through the Viewfinder
looking through the Viewfinder
or at the LCD Monitor.
3.
Put the subject of your photo
right in the center and press the
right in the center and press the
shutter button all the way.
After the camera focuses automatically,
the still image is taken and recorded.
the still image is taken and recorded.
Certain subjects are hard to bring into
focus:
focus:
It may be impossible to bring the following
subjects into focus.
subjects into focus.
• Subjects lacking contrast (the sky, a white
wall, the hood of a car, etc.)
• Flat two-dimensional objects with only hori-
zontal lines and no significant protrusions.
• Quickly moving objects.
• Things in poorly lit places.
• Areas with strong backlighting, or reflections.
• Things that flicker, such as fluorescent lights.
• Things in poorly lit places.
• Areas with strong backlighting, or reflections.
• Things that flicker, such as fluorescent lights.
When you want to shoot subjects like this,
first focus on an object the same distance as
your subject and then shoot. (see P.37)
If you find it difficult to focus the camera, it is
recommended to half press the shutter
release button before shooting. Depending
on the circumstances, also use the flash and
focus lock.
first focus on an object the same distance as
your subject and then shoot. (see P.37)
If you find it difficult to focus the camera, it is
recommended to half press the shutter
release button before shooting. Depending
on the circumstances, also use the flash and
focus lock.
If it is difficult to focus the camera, see P.34.