Canon XF205 用户手册
Custom Picture Settings
130
Custom Picture Settings
You can preset a number of picture-related settings (A 133). After changing individual settings to your
preference, you can save the whole set in the camcorder or on an SD card as a custom picture file. You can then
load the file at a later date to change the current settings to the preset levels you selected. You can even add
custom picture settings to MXF clips recorded on a CF card.
You can save up to 9 different custom picture files on the camcorder and up to 20 custom picture files on an SD
card. Custom picture files can be copied between the camcorder and SD card.
Custom picture files created with this camcorder are compatible only with other XF200 / XF205 camcorders.
preference, you can save the whole set in the camcorder or on an SD card as a custom picture file. You can then
load the file at a later date to change the current settings to the preset levels you selected. You can even add
custom picture settings to MXF clips recorded on a CF card.
You can save up to 9 different custom picture files on the camcorder and up to 20 custom picture files on an SD
card. Custom picture files can be copied between the camcorder and SD card.
Custom picture files created with this camcorder are compatible only with other XF200 / XF205 camcorders.
Selecting Custom Picture Files
Select a custom picture file to easily apply its settings to your recordings
or to edit, rename, protect, or transfer it.
or to edit, rename, protect, or transfer it.
1 Open the [Custom Picture] submenu.
[~ Camera Setup] > [Custom Picture]
2 Select [
-
/ Select File] and then press SET.
• The default custom picture file is [Off]. A list of custom picture files in
the camcorder and SD card appears. Files in the camcorder begin
with [C1] to [C9]; those on the SD card begin with [SD1] to [SD20].
with [C1] to [C9]; those on the SD card begin with [SD1] to [SD20].
3 Select the desired file and then press SET.
• Select [Off] to record without applying any custom picture settings.
• To apply the custom picture settings of the selected file, continue to step 4. To perform other operations on
the selected file (edit settings, copy, protect, etc.), continue instead with the one of the procedures in the
following pages.
following pages.
4 Press the MENU button to exit the menu.
• The selected custom picture file’s settings will be applied. / (camcorder) or . (SD card) and the custom
picture file’s number will appear on the left of the screen.
NOTES
• About changing custom picture related settings using the optional RC-V100 Remote Controller
- When the remote controller is connected to the camcorder, you can press the remote controller's CUSTOM
PICT. button to open/close the [Custom Picture] submenu.
- If a protected custom picture file or no custom picture file is selected on the camcorder ([-
/
Select File]
is set to [Off]), custom picture related settings cannot be changed using the remote controller.
- While the remote controller is connected to the camcorder, custom picture files on the SD card ([SD1] to
[SD20]) cannot be used. If you connect the remote controller while a custom picture file on the SD card was
selected, the custom picture file will change automatically to [Off] (recording without custom picture
settings). To use the settings of a custom picture file saved on the SD card, copy the file in advance from the
SD card to an open file slot in the camcorder (A 132).
selected, the custom picture file will change automatically to [Off] (recording without custom picture
settings). To use the settings of a custom picture file saved on the SD card, copy the file in advance from the
SD card to an open file slot in the camcorder (A 132).
Operating modes:
[~ Camera Setup]
[Custom Picture]
[-
/
Select File]
[Off]
Preset Custom Picture Files
By default, custom picture file [C9] in the camcorder is protected. Remove the protection (A 131) to edit the
file.
file.
[C9: Wide DR]: Applies a gamma curve with a very wide dynamic range and an appropriate color matrix.
COP
Y