Concord Camera JD C3.1z3 用户手册

9

4

M

28/45

 ⁄   ⁄ 

 ⁄   ⁄ 

The camera has 3 operational modes: Camera Mode, Review Mode and Video Clip Mode.

To change the camera operational mode, slide the mode switch horizontally to the corresponding position.
 

1.  Turn the camera on.
2.  Set it to (      ) Camera Mode.
     (To save battery power, press the (      ) button to turn off the LCD display).
3.  Aim the camera at the subject, then look through the Viewfinder to frame the desired object(s) to be included  

in the photo. (fig.1.1)

    Note: For better results, stand at least 2 ft (0.6m) away from the subject.
4.  Press and hold the Shutter button halfway down to activate the Auto-Focus function until the green AF LED 

stops blinking and the AF frame on the LCD changes to green. (fig.1.2)

     (The camera will automatically determine the best focus, and a rapid click can be heard.) 
5.  Hold the camera steady with both hands, then firmly press the Shutter button down fully to capture the 

image. (fig.1.3)

 

•  When the image is captured, a beep can be heard. 

 

•  After an image has been captured, the Flash Ready LED next to the Viewfinder will blink to indicate  

 

  that the image is being stored.

For taking pictures or 
customizing your camera 
settings for picture taking.

For browsing images and 
video clips, deleting images 
and video clips, playing 
a slide show, transferring 
images and/or video clips 
from the internal memory 
to the SD card, or rotating 
images. 

For recording video clips or 
customizing camera settings 
for video-clip recording.

 ⁄   ⁄ 

 ⁄   ⁄ 

4

M

28/45

GETTING STARTED / TAKING A PICTURE

fig.1.1

fig.1.2

fig.1.3

 ⁄   ⁄ 

 ⁄   ⁄ 

 ⁄   ⁄ 

 ⁄   ⁄ 

 ⁄   ⁄ 

 ⁄   ⁄