Concord Camera JD C3.1z3 用户手册

11

 ⁄   ⁄ 

 ⁄   ⁄ 

TAKING A PICTURE

When the subject is not located at the center of the picture, use this feature to lock the focus on the subject 
before using the usual procedures to take a picture. 

Auto-Focus LED
When the Shutter button is pressed halfway, the Auto-Focus feature will be activated and the Auto Focus 
(green) LED will display the status of the Auto-Focus lock.

 

 

 

 

White 

Not in focus.

 

 

Green 

The subject(s) is in focus.

1.  Aim the camera so that the AF frame at the center of the LCD screen is positioned on the “off-centered” 

subject . (fig.1.1)

2.  Hold the camera steady with both hands, then press and hold the Shutter button halfway down until the AF 

frame changes to green and the green AF LED stops blinking. (fig.1.2)

3.  Recompose your picture. (fig.1.3)
     (Be sure to press and hold the Shutter button down halfway while recomposing the picture.)
4.  To capture the picture, press the Shutter button down fully. (fig.1.4)

Note: The AF LED will continue to blink in the following conditions:
1.  There are several subjects at different distances within the focus lock area. Recompose the picture by 

moving the camera slightly.

2.  There is no color contrast. Recompose the picture with a subject that contains more color.
3.  There is insufficient lighting. Increase the lighting in the surrounding area.
4.  Please refer to P.11 to change Auto Focus mode and refer to P.24 to change AF assist light setting. 

 ⁄   ⁄ 

 ⁄   ⁄ 

Lit
The subject is in 
focus.

Blinking
The camera is adjusting 
the focus.

3

M

28/45

5

10

30

2

3

M

28/45

5

10

30

2

 fig. 1.1

 ⁄   ⁄ 

 ⁄   ⁄ 

28/45

fig. 1.2

fig. 1.3

fig. 1.4

3

M

28/45

5

10

30

2

28/45

 ⁄   ⁄ 

 ⁄   ⁄