Fujitsu C150-E049-02EN 用户手册

M3099GX/GH OEM Manual

B-5

SETUP MODE

C If you press the [Mode 1] at Screen 12, IPC-2

pre-set mode can be not used. Also the setting
is changed to “No” obligatory and stored to
EEPROM. If you press the [Mode 2] at
Screen 12, IPC-2 pre-set mode can be used
and the setting number is stored to
EEPROM.
When you close the setup mode, go to 9.

Panel/Host Set Ignore

No-Model

Yes-Mode 2

Screen 11

Host Set Ignore

No-Model

Yes-Mode 2

Screen 12

User’s paper are classified in line-art scanning as follows:
The horizontal axis shows the background density/color of paper.
The vertical axis shows the density of character/line.

1–5 are the pattern number set
in setup mode.

1: Normal background and

character.

2: Normal background and

light character.

3: Dark background and

normal-density character.

4: Light character on red paper.
5: Light character on green

paper.

(1) For patterns “1” to “5” when the power is turned on

Check that IPC-2 for front/back sides are installed during initialization.
If IPC-2 for either the front or back side is not installed, the scanner
regards as no setting obligatory and changes the memory of EEPROM.

(2) When IPC-2 pre-set is executed in setup mode

Check that IPC-2 for front/back sides are installed when the scanner
enters in IPC-2 pre-set.
If IPC-2 for either the front or back side is not installed, the scanner
does not enter in IPC-2 pre-set.

(3) When IPC-2 pre-set mode is executed

When IPC-2 pre-set mode is executed in online mode, the reading
parameter is valid or invalid (Host setting is invalid) as follows:

Background density Background color

Normal

← →

Dark Red

Green Blue

Normal

Character

↑

density

↓

Light