Nikon 5000ED 用户手册

Before turning on the scanner for the fi rst time, make sure that Nikon Scan is installed on the 
computer and that the power and USB cables are connected.  For information on installing 
Nikon Scan and connecting the cables, see “Setup” (

 7).

1 

Turn the computer on
Turn the computer on and wait for the operating system to start up.

2 

Turn the scanner on
The status LED will blink for about 30 seconds (5000 ED) or 20 seconds (COOLSCAN V 
ED) while the scanner initializes.  The status LED will stop blinking when initialization is 
complete.

Status LED off

Scanner off

Scanner on

Status LED blinks

Status LED on

A “Digital Signature Not Found” dialog will be displayed the fi rst 
time the scanner is connected and turned on following installation 
of Nikon Scan.  Click Yes to register the scanner with Windows.

If the status LED fl ashes quickly (about fi ve times a second), turn the scanner off, wait at least fi ve sec-
onds, and turn the scanner on again.  If the problem persists, see “Troubleshooting” (

 56).