Huffy M0073 用户手册

18

Move the Quick Release Lever (D) to 
the “open” position so the word “open” 
is pointing away from the Seat Post 
Clamp (E).

NOTE: The words “open” and “close” 
are on opposite sides of the quick 
release lever.

fig 11

E

B

F

33

D

 CAUTION: Operate the Quick Release Lever by hand only. Do not use a ham-

mer or any other tool to tighten the quick release lever.

You must use strong force to move the quick release lever to the “close” position. If 
you can easily move the lever to the “close” position, the clamping force is too light.

 WARNING: If the clamping force of the Quick Release Lever is too light, the 

seat post can loosen while riding. This can cause injury to the rider or to others.

•  Open and close the Quick Release Lever with one hand while you turn the Adjust-

ing Nut (F) with the other hand (fi g 11).

•  Tighten or loosen the adjusting nut by hand, so that you fi rst feel resistance to the 

quick release lever when it perpendicular to the bicycle frame.

•  Push the Quick Release Lever to the “close” position (fi g 11).
•  When in the “close” position, make sure the Quick Release Lever lays against the 

Seat Post Clamp (E).

•  The tightening torque of the Quick Release Lever should be tight enough so that 

the seat does not move during normal operation.