Huffy M0073 用户手册

16

•  Straddle the front wheel between your legs.
•  Try to turn the front wheel by turning the handlebar.
•  If the handlebar and stem turn without turning the front wheel, realign the stem with 

the wheel and tighten the stem bolt(s) tighter than before (about 1/2 revolution only 
at a time).

•  Do this test again, until the handlebar and stem do not turn without turning the front 

wheel.

•  If the handlebar moves, loosen the bolt(s) of the handlebar clamp.
•  Put the handlebar in the correct position and tighten the bolt(s) of the handlebar 

clamp tighter than before.

•  If the handlebar clamp has more than one bolt, tighten the bolts equally.
•  Do this test again, until the handlebar does not move in the handlebar clamp.

Note: Exceeding 100 lbs downward force may damage the Threads of the Stem and 
Handlebar.  If the Threads are damaged, the Handlebar will not stay in position when 
tightened.

•  Hold the bicycle stationary and try to move the 

ends of the handlebar up and down.

 CAUTION: Do not exceed 100 lbs downward 

force.