Raritan Computer Home Security System 用户手册

 

If you have a CC-SG and Power IQ, there are severals ways to use them 
together. 

1.  Control power to Power IQ IT devices via CC-SG. 

For example, if you want to control power to a Power IQ IT device 
which is also a CC-SG node, you can use a Power IQ Proxy interface 
to give power control commands in CC-SG.  

2.  Use CSV file imports and exports to share data between these two 

systems. 

For example, if you have a CC-SG with a large number of Dominion 
PX devices deployed on the IP network, you can export a CSV file 
from CCSG that contains all the node names, edit the file to 
specifications, then import it into Power IQ. See 

 (see "Export Dominion PX Data to Use in Power IQ" on page 

Or, if you have Power IQ with a large number of Dominion PX 
devices deployed, and you want to get the current IT Device Names 
into CC-SG as nodes, you can export a file from Power IQ, edit the 
file to specifications, then import it into CC-SG. See 

 (on page 307). 

Power Control of Power IQ IT Devices .................................................305 
Importing and Exporting Dominion PX Data from Power IQ .................306 

 

 

You can use CC-SG to control power to a Power IQ IT device that you've 
added to CC-SG as a node. 

This enables you to control power to nodes connected to PDUs not 
managed by CC-SG. 

 

You must configure the Power IQ Service before you can add Power IQ 
proxy interfaces to nodes. This is done via the CC-SG Access menu. 

 

1.  In the CC-SG Admin Client, choose Access > Power IQ Services > 

Add Power IQ Services. The New Power IQ Services Configuration 
dialog appears.