Raritan Computer Home Security System 用户手册

 

Chapter 6: Devices, Device Groups, and Ports 

 

Discover Devices initiates a search for all devices on your network. After 
discovering the devices, you may add them to CC-SG if they are not 
already managed. 

 

1.  Choose Devices > Discover Devices. 

2.  Type the range of IP addresses where you expect to find the devices 

in the From Address and To Address fields. The To Address should 
be larger than the From Address. Specify a mask to apply to the 
range. If a mask is not specified, then a broadcast address of 
255.255.255.255 is sent, which broadcasts to all local networks. To 
discover devices across subnets, you must specify a mask. 

3.  Check Broadcast discovery if searching for devices on the same 

subnet on which CC-SG resides. Clear Broadcast Discovery to 
discover devices across different subnets. 

4.  To search for a particular type of device, select it in the list of Device 

types. By default, all device types are selected. Use CTRL+click to 
select more than one device type. 

5.  Select the Include IPMI Agents checkbox to find targets that provide 

IPMI power control. 

6.  Click Discover to start the search. At any time during the discovery, 

you can click Stop to discontinue the discovery process. Discovered 
devices appear in a list. 

7.  To add one or more discovered devices to CC-SG, select the 

devices from the list and click Add. The Add Device screen appears 
with some of the data already populated. 

If you selected more than one device to add, you can click Previous 
and Skip at the bottom of the screen to navigate through the Add 
Device screens for the devices you want to add. 

8.  The Add Device page is different for different device types. See the 

instructions on adding each device type CC-SG discovered. 

ƒ  For KVM or Serial devices, see 

 (on 

page 34). 

ƒ  For Powerstrips, see 

 (on page 36). 

ƒ  For Dominion PX powerstrips on the IP network, see 

 (on page 36). 

9.  Click Apply to add a discovered device and continue to the next 

discovered device. Click OK to add the current discovered device 
and stop the process of adding the discovered devices.