Raritan Computer Home Security System 用户手册

Chapter 6: Devices, Device Groups, and Ports 
 

Devices must be added to CC-SG before you can configure ports or add 
interfaces that provide access to the nodes connected to ports. The Add 
Device screen is used to add devices whose properties you know and 
can provide to CC-SG. To search for devices to add, use the Discover 
Devices option. See 

 (on page 33). 

To add Raritan PowerStrip Devices that are connected to other Raritan 
devices to CC-SG, see 

 (on page 69). 

 

1.  Choose Devices > Device Manager > Add Device. 

2.  Click the Device Type drop-down arrow and then select the type of 

device you are adding from the list. Depending on the device type 
you select, you will see a slightly different Add Device page. 

• 

For instructions on adding KVM or serial devices, see 

 (on page 34). 

• 

For instructions on adding Powerstrip devices, see 

 (on page 36). 

• 

For instructions on adding Dominion PX devices, see 

 (on page 36). 

 

KVM and serial devices may support 256-bit AES encryption, which CC-
SG also supports as of release 4.1. If the device is set to the default 
encryption mode "auto-negotiate", the device will negotiate with CC-SG 
to select an appropriate encryption level to function with CC-SG. 

1.  Type a name for the device in the Device name field. See 

 (on page 353) for details on CC-SG's rules for name 

lengths. 

2.  Type the IP Address or Hostname of the device in the Device IP or 

Hostname field. See 

 (on page 2) for 

hostname rules. 

3.  Type the number of the TCP communication port used to 

communicate with the device in the TCP Port Number field. The 
maximum is five numeric characters, from 1 to 65535. The default 
port number for most Raritan devices is 5000.  

4.  Type the name used to log into this device in the Username field. 

The user must have administrative access. 

5.  Type the password needed to access this device in the Password 

field. The user must have administrative access.