Wayne-Dalton 9100 用户手册

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your 

local yellow pages/business listings or go to the 

Find a Dealer section online at www.wayne-dalton.com

SAfETY GLASSES

PLIERS/CUTTERS

1/2, 7/16” & 9/16” 

WRENCHES

5/8”, 1/2”, 7/16” 

& 9/16” SOCkET

PHILLIPS HEAD 

SCREWDRIVER

RATCHET WRENCH

POWER DRILL

SAWHORSE

GLOVES

1/2”, 7/16” SOCkET 

DRIVER

HAMMER

VICE GRIPS

STEP LADDER

TAPE MEASURE

LEVEL

VICE CLAMPS

PENCIL

 3/16”, 7/16” & 1/8” 

DRILL bITS

fLAT TIP SCREWDRIVER

3” EXTENSION

Counterbalance spring tension must always be released before any attempt is made to start removing an existing door.

A POWERfUL SPRING RELEASING ITS ENERGY SUDDENLY CAN CAUSE SEVERE OR fATAL INjURY. TO AVOID 

INjURY, HAVE A TRAINED DOOR SYSTEMS TECHNICIAN, USING PROPER TOOLS AND INSTRUCTIONS, RELEASE 

THE SPRING TENSION.

for detailed information see supplemental instructions “removing an existing door/preparing the opening”. These instructions are 
available at no charge from Wayne-Dalton Corp., P.O. box 67, Mt. Hope, OH 44660, or at www.wayne-dalton.com.

HACkSAW