Regency L676 用户手册

Regency

®

 L676 Direct Vent Gas Fireplace

INST

ALLA

TION

1)  Remove the glass door.

3)   Lift up and pull out the heat shield slightly 

to clear the screwheads and then hang it 
on the top bracket (located directly above 
the heat shield).

4)  Unplug the power source.

5)  Loosen the bottom screw and remove the 

top screw from the power module.

6)   Cut the cable tie that holds together the 

wires for the power module and the pull 
out the power module.

7)  Remove the power module cover by 

removing the 2 screws, one on each side.

8)  Install the 9V battery and the AA battery.

2)   Loosen the 2 screws that hold the left side  

heat shield in place.

(within Power Module)

 

a.  Release the 2 door latches on the left      
     and right side at the top of the fi rebox.

 b.  

 Swing the door out from the top and release   
the hinges on the left and right side of the  
door by lifting them up.