Enviro EG40 BV 用户手册

下载
页码 23
13
Secondary Installation
I
NSTALLATION
 
OF
 L
OG
 S
ET
 
AND
 E
MBERS
:
CAUTION: Use only the type of ember 
material  supplied  with  this  appliance. 
Due to the irregular size of the ember 
material  there  may  be  more  than 
required.  The  use  of  other  foreign 
materials  on  the  burners  may  create 
dangerous conditions.
If  over  time,  through  cleaning  and 
servicing,  these  embers  require 
replacement,  contact  the  nearest 
ENVIRO  dealer  for  replacement 
embers.
1.  The  embers  can  be  place  before 
or  after  the  logs  are  placed.  A  bag  of 
ceramic  fiber  embers  and  rock  wool 
embers  is  provided  gently  remove  the 
ember  material  from  the  plastic  bag. 
Spread  a  layer  loosely  in  a  random 
manner across the burner tray. Do not 
allow  any  embers  to  rest  against  pilot 
assembly.  (See  Figure  12  or  15  for 
proper ember placement.)
DO  NOT  pack  this  ember  material  as 
this  could  create  an  unsafe  condition, 
leave embers loose 
2.  Carefully  remove  logs  from  box.  
Check  to  ensure  there  is  no  damage.  
It  is  very  important  to  install  all  logs 
in their proper position to insure safe, 
optimum operating conditions.
3.  Place  the  log  set  into  the  firebox. 
Locate each log by seating it down onto 
the  burner  tray  support  pins.  Follow 
Figures 11 to 15 proper log placement.
Figure 11: Step 1 of Log Placement.
Figure 12: Step 2 of Log Placement
Figure 13: Step 3 of Log Placement.
The placement of the logs is not arbitrary. If they are positioned incorrectly, the flames can be “pinched” and will 
not burn correctly.  The burner come with five (5) locator pins, and the rear log has one (1) ledge, which make 
alignment easier. Using the pictures provided, carefully set the logs in place.
NOTE: The logs are fragile and should be handled gently.