Cooper Lighting IMI-597 用户手册

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.

7a. Slipping the Assembly over the Pole (Single Head) -

Slip the fixture assembly over a 4-inch diameter pole as shown in 
Figure 7a. There is a shoulder inside the arm that will rest on the top of 
the pole. Make wiring connections at the opening at the top of the arm.

7b. Slipping the Assembly over the Pole (Dual Head) -

Slip the fixture assembly over a 4-inch diameter pole as 
shown in Figure 7b. There is a shoulderinside the arm that will
rest on the top of the pole. Make wiring connections at the 
opening at the top of the arm.

TM