Cooper Lighting IMI-597 用户手册

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.

8a. Attaching the Mast and Pole Cap (Single Head) -

Assemble the ARM MAST and POLE CAP to the fixture and arm
assembly. See Figure 8a. Tighten the six (6) screws that clamp the arm
to the pole in addition to the set screws that secure the ARM MAST and
POLE CAP.
Torque: 250 in-lbs.

NOTE: To assure a safe product over time, check and adjust

torque to proper settings each time unit is maintenanced.

8b. Attaching the Mast and Pole Cap (Dual Head) -

Assemble the ARM MAST and POLE CAP to the fixture and arm assembly.
See Figure 8b. Tighten the six (6) screws that clamp the arm to the pole in
addition to the set screws that secure the ARM MAST and POLE CAP.
Torque: 250 in-lbs.

NOTE: To assure a safe product over time, check and adjust

torque proper settings each time unit is maintenanced.

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269

IMI-597 AVU040197

Flite

Sheet 7 of 8

8/31/04

IMI-597

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

RETAIN FOR FUTURE REFERENCE.

WARNING:

Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing
or servicing.

Fig. 8a

Fig. 8b

WARNING

Risk of Personal Injury

Fixture may become damaged and/or
unstable if not installed properly

Tighten all fixture components to their
recommended torque values