Panasonic SC-HTB770 用户手册

RQT9778

You can select different modes to suit the type of 
connections with emphasis on connectivity or high quality 
audio. 
≥ Make sure that a Bluetooth

®

 device is already paired 

with this system. (> 29)

≥

“ ” 

indicator will blink slowly. If the indicator lights, a 

Bluetooth

®

 device is already connected with this system. 

Disconnect it. (> 29)

≥ The setting changes each time [

] is pressed.

≥ The indicator for the selected setting blinks for 10 sec and 

then exits the setting mode.

≥ The setting is maintained until it is changed again.

Depending on your preference, It is possible to turn off the 
3D surround effect and the clear-mode dialog effect.

hold [VOL i] on the main unit for 

≥ The setting changes each time [SOUND] is pressed.
≥ The indicator for the selected setting blinks for 20 sec and 

then exits the setting mode.

≥ This setting will be reset to on when the main unit is turned 

off.

≥ When off is selected, the dialog effect level cannot be 

adjusted.

You can turn off dimmer mode and keep the LED 
indicators bright.

and hold [s VOL] on the main unit for 

≥ The indicator for the current condition will turn brighter.
≥ The setting is maintained until it is changed again.
≥ Default setting of this function is on.

To turn on dimmer mode, repeat the operation above.
After performing the operation, the indicator for the current 
condition will be dim.

“STANDARD” indicator blinks:
MODE1 (Factory preset)

Emphasis on connectivity

“STEREO” indicator blinks:
MODE2

Emphasis on audio quality

“STANDARD” indicator blinks:
3D surround effect and clear-mode 
dialog effect is on.

“STEREO” indicator blinks:
3D surround effect and clear-mode 
dialog effect is off.

SC-HTB770PPC_RQT9778-1P_mst.book  Page 34  Tuesday, January 29, 2013  11:33 AM