Panasonic SC-BT07 用户手册

RQT9483

Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (> 55) for late night viewing.

≥On

≥Off

≥Auto:

Effective only when Dolby TrueHD is played.

Digital Audio Output 
≥Press [OK] to show the following settings.

Select whether Dolby Digital, Dolby 
Digital Plus, Dolby TrueHD, DTS 
Digital Surround, DTS-HD High 
Resolution Audio or DTS-HD Master 
Audio is output in “Bitstream” or 
“PCM” format.
≥Not making the proper settings may 

result in noise.

≥If the unit is connected with the HDMI AV 

OUT terminal, the specifications of the 

connected equipment take preference 

over this unit and audio selected in these 

items may not be output (e.g., when a 

television is connected, the HDMI audio 

output of this unit is limited to 

down-mixed 2ch.)

≥Bitstream:

Select “Bitstream” when the connected equipment can decode the 

respective audio format.

– Connect equipment supporting HDMI (High Bit rate Audio) and use a 

High Speed HDMI Cable in order to output high bit rate audio such as 

Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or 

DTS-HD Master Audio.

≥PCM:

Select “PCM” when the connected equipment cannot decode the 

respective audio format.

Refer to the operating instructions for connected devices to verify whether 
or not they can decode each of the audio formats.

≥Bitstream:

When connected to equipment with a built-in MPEG 

decoder.

≥PCM:

When connected to equipment without a built-in MPEG 

decoder.

BD-Video Secondary Audio [BD-V]
Turn on/off the clicking sound on the menu and audio with 
secondary video in picture-in-picture mode. (> 22)

≥On:

The primary audio and secondary audio are mixed and output. 

The sampling frequency is converted to 48 kHz.

≥Off:

The clicking sound on the menu and secondary audio are not 

output.

PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or 
more.
≥Signals are converted to 48 kHz despite the settings across in the 

following cases:

– when the signals have a sampling frequency of over 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to “On”

≥On:

Signals are converted to 48 kHz. (Choose when the connected 

equipment cannot process signals with sampling frequency of 

96 kHz.)

≥Off:

Signals are output as 96 kHz. (Choose when the connected 

equipment can process signals with sampling frequency of 

96 kHz.)

Downmix
Switch the downmix system for playing back multi-channel 
surround sound.
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set 

to “Bitstream”, there are no downmix effects for the outputted 

audio.

≥The audio will be outputted in “Stereo” in the following cases.

– AVCHD playback

– Playback of clicking sound on the menu and audio with 

secondary video in picture-in-picture mode

≥Stereo:

When connected to equipment that does not support 

the virtual surround function.

≥Surround encoded: When connected to equipment that supports the 

conversion from 2 channels to multi channel 

surround.

High Clarity Sound 
When the analogue video terminal is not being used, the electrical 
current that flows through the analogue video circuit can be 
stopped. This prevents adverse effects on the audio signals and 
produces clearer sound.
≥This works only when “BD/DVD”, “SD” or “USB”is selected as the 

source.

≥Set to “Enable” and then set “High Clarity Sound” on the 

on-screen menu to “On”. (> 37)

≥Use this when outputting image via HDMI AV OUT terminal. 

Analogue image will not be output via COMPONENT VIDEO OUT 

terminal or VIDEO OUT terminal.

≥Enable

≥Disable

Refer to page 42

On-Screen Messages
Choose whether to show status messages automatically.

≥Automatic

≥Off

On-Screen Language
Choose the language for these menus and on-screen messages.

≥English

≥Français

≥Español

≥Deutsch

≥Italiano

≥Nederlands 

≥РУССКИЙ

Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to “On”, the masked-off area on the screen 

becomes grey.

[Only when connecting with an HDMI cable or a component 

video cable and “HDMI Video Format” (> 40) is set to any other 

mode than “576p/480p”, or “Component Resolution” (> 40) is 

set to “720p” or “1080i”]

≥On:

If there is no operation for 5 minutes or more, the displayed screen switches 
to the other states automatically.

– When the Direct Navigator or START menu is displayed, the display 

returns to the screen saver mode.

– When CD or MP3 is played, the display returns to the screen saver 

mode. (Playback continues.)

– When still pictures are shown (except for Slide Show), the display 

returns to the Direct Navigator screen.

≥Off

FL Display
Changes the brightness of the unit’s display.
– The brightness of the volume indicator (> 6) is also changed.

≥Bright

≥Dim:

The display is dimmed.

≥Automatic:

The display is dimmed, but brightens when you perform 

some operations.

Information about the software used by this unit is displayed.

SCBT207GN-RQT9483-L.book  39 ページ  ２００９年５月２５日　月曜日　午後９時３６分