Panasonic SC-BT07 用户手册

RQT9483

To select these settings, perform steps 1 – 5 (> 38)

*1 This function has no effect when S.SURROUND is selected during AUX (TV) playback.
*2 In this unit, a P4HD (> 56) video processor is used to provide video of optimal resolution to the connected TV.

TV Aspect
Set to match the type of television connected.

When connected to a 16:9 widescreen television:
≥16:9: 

Video recorded for 4:3 aspect screen is displayed as a 4:3 

ratio image in the center of the screen.

When connected to a 4:3 aspect television:
≥4:3:

Video recorded for a widescreen is played as Pan & Scan 

(unless prohibited by the producer of the disc). When playing 

BD-Video, video is output as “4:3 Letterbox”.

≥4:3 Letterbox: 

Video recorded for a widescreen is played in the letterbox style.

When connected with a Plasma display, adjust if you notice 
the audio is out of sync with the video.

≥Auto ≥0ms ≥20ms ≥40ms ≥60ms ≥80ms ≥100ms ≥120ms ≥140ms
When using VIERA Link “HDAVI Control” with “HDAVI Control 3” (or later) 
compatible TV (> 30), select “Auto”. Audio and video will automatically be set in 
sync. 
– This works only when “BD/DVD”, “SD”, “USB”, “AUX”, “D-IN1” (DIGITAL IN 1) or 

“D-IN2” (DIGITAL IN 2) is selected as the source. (> 30)

HDMI Connection
≥Press [OK] to show the following settings.

HDMI Video Mode
Select “On” when video is output from HDMI AV OUT 
terminal.

≥On:

Images are output from the HDMI AV OUT terminal in the 

resolution set in “HDMI Video Format”. Video from 

COMPONENT VIDEO OUT terminal is output as “576i/480i”.

≥Off

Images are output in the resolution set in “Component 

Resolution”.

The items supported by the connected devices are 
indicated on the screen as “¢”. When any item without 

“¢” is selected, the images may be distorted.

≥Automatic:

Automatically selects the output resolution best suited to the 

connected television (1080p, 1080i, 720p or 576p/480p).

≥576p/480p

≥720p

≥1080i

≥1080p

– When outputting 1080p signal, we recommend using High Speed HDMI Cables 

that have the HDMI logo (as shown on the cover) and are less than 5.0 meters to 

prevent video distortion etc.

– To enjoy high definition video up-converted to 1080p, you need to connect the 

unit directly to 1080p compatible HDTV (High Definition Television). If this unit is 

connected to an HDTV through other equipment, it must also be 1080p 

compatible.

24p Output [BD-V] [DVD-V]
When this unit is connected to a TV supporting 1080/24p 
output via an HDMI cable, this unit displays each frame at 
1/24 second intervals – the same interval originally shot 
with the film camera.
≥When playing DVD-Video, set to “On” and then set 

“24p” in “Picture” (> 37) to “On”.

≥On:

Images in 24p are output in 24p as they are. 

However,

–when video is being output at 24 frames, images from any 

other terminal than the HDMI AV OUT terminal may not be 

output properly.

–[BD-V]: when images other than 24p are played, images are 

output at 60p.

≥Off

HDMI Output Range
Effective when connected to a device that only supports 
RGB output.

≥Standard:

The video is output as it is.

≥Enhanced: 

When the black and white contrast of a video is low, the signal 

is enhanced to reproduce clear video.

HDMI Audio Output
This setting selects whether or not to output audio from 
HDMI.

≥On:

To output audio through the TV’s speakers or other devices.

≥Off:

To output audio through system speakers. (The audio is output 

using the settings of the main unit.)

VIERA Link
Set to use “HDAVI Control” function when connected with 
an HDMI cable to a device that supports “HDAVI Control”.

≥On:

≥Off:

Select when you do not want to use “HDAVI Control”.

Power Off Link
Select the desired power off link setting of this unit for 
VIERA Link operation (> 30). (This works depending on 
the settings of the connected VIERA Link “HDAVI Control” 
compatible equipment.)

≥Video/Audio:

When the TV is turned off, this unit will turn off automatically.

≥Video:

When the TV is turned off, this unit will turn off except during 

the following conditions:

–audio playback ([CD] [MP3])

–iPod mode

–radio mode

–“AUX” or “D-IN1” (DIGITAL IN 1) mode (non-selected TV 

audio setting for VIERA Link)

–“D-IN2” (DIGITAL IN 2) mode (non-selected TV audio setting 

for CABLE/SAT)

This sets the video output resolution when using the 
COMPONENT VIDEO OUT terminal.

≥576i/480i

≥576p/480p

≥720p

≥1080i

480i, 480p: When playing NTSC discs
576i, 576p: When playing PAL discs

Even if you select “720p” or “1080i”, the video output resolution is restricted to 
“576p/480p” when DVD-Video discs, DivX and BD-Video discs recorded at a rate 
of 50 field per second are output from the COMPONENT VIDEO OUT terminals.

TV System
Change the setting to match the equipment you are 
connecting with.
≥If picture output is not smooth, change the setting.

≥When NTSC contents are played, they are outputted in 

the signal format specified in the “NTSC Contents Output”, 

irrespective of the settings here.

≥NTSC:

Select when connecting to a NTSC television. 

≥PAL:

Select when connecting to a PAL or multi-system television.

SCBT207GN-RQT9483-L.book  40 ページ  ２００９年５月２５日　月曜日　午後９時３６分