Riccar BRLP 用户手册
18
19
Maintenance and Care
Maintenance and Care
When to change the vacuum bag
The full bag indicator light is designed to
show when the bag is full or when there is
a clog in the vacuum.
show when the bag is full or when there is
a clog in the vacuum.
The system measures airflow and alerts the
user when airflow is significantly reduced—
most commonly from full bags and clogs.
user when airflow is significantly reduced—
most commonly from full bags and clogs.
The light could also come on when
vacuuming fine powders such as flour or
drywall dust. These materials can quickly
block the bag pores, significantly reducing
airflow before the bag appears to be full.
The vacuum bag should still be changed.
vacuuming fine powders such as flour or
drywall dust. These materials can quickly
block the bag pores, significantly reducing
airflow before the bag appears to be full.
The vacuum bag should still be changed.
Note: The vacuum bags are disposable
and intended to only be used once.
Do not attempt to reuse as suction
and filtration performance would be
greatly reduced.
and intended to only be used once.
Do not attempt to reuse as suction
and filtration performance would be
greatly reduced.
Replacing the vacuum bag
• Open the bag compartment lid.
• Remove vacuum bag by pressing the
bag tab.
• To insert a new bag, place the base of
the bag collar on the bag supports. Then
secure the top of the bag collar with the
bag tab.
secure the top of the bag collar with the
bag tab.
• Tuck the bag corners into the vacuum
before replacing the bag compartment lid.
• Replace lid and press onto vacuum until
it snaps into place.
Yellow Warning Light
Brushroll
Full Bag
Bag Collar
Bag
Bag
Supports
Bag Tab