Riccar BRLP 用户手册

下载
页码 17
20
21
When to change filters
At minimum, it’s recommended to replace  
the filters after using twelve vacuum bags.
If someone in your household is highly  
sensitive to airborne allergens, it is  
recommended to change the filter set  
after every six vacuum bags. 
Replacing the post filter
Note: Your vacuum is equipped with either 
an S-Class HEPA filter or an electrostatic 
filter. To change either type of filter, follow 
the instructions below.
•  Open the bag compartment lid and locate 
the post filter below the bag. 
•  Using the tab on the left, remove the used  
filter and throw away.  NOTE: Filters  
cannot be washed and reused. 
•  When inserting the new post filter, first 
position the tabs in the right side of the  
casing. Then, snap it into place. 
•  Close the bag compartment lid. 
Replacing the secondary filter
•  Open the bag compartment lid and locate 
the secondary filter on the left side of the 
bag compartment.
•  Pull the front tab away from the vacuum 
to remove the filter holder. 
•  Remove and throw away the used filter. 
•  Insert the new filter. Then reposition the 
filter holder back end first and snap into 
place behind the tab.  
• Close the bag compartment lid. 
Maintenance and Care
Maintenance and Care