Panasonic CQ-RDP472N 用户手册

26

Cautions:
¡Check the connectors provided on your car (see

precaution below) before connecting the system.

¡This unit is designed for use in a car having a 12-

volt negative ground battery system.

¡To prevent damage to the unit, be sure to follow the

connection diagram.

¡Strip about 5 mm of the lead ends for connection

(only non-ISO connector cords).

¡Do not insert the power connector into the unit

until the wiring is completed.

¡Be sure to insulate any exposed wires to prevent

short circuiting with the car chassis.  Bundle all
cables, and prevent cable terminals from touching
any metal parts.

¡The pin arrangement of the power connector

conforms to ISO standard.

¡The pin arrangement of ISO connectors in some

cars may differ from the ISO standard.

¡Please check that the pin arrangement of the

connector in your car conforms to ISO standard.

¡For car types A and B, change the wiring of the

red and yellow leads as shown at below.

¡After connection, insulate the portions marked

(C) with insulating tape.

Note: For cars other than types A and B, please
consult your local car shop.

C

C

BATTERY 15A

ACC

C

C

BATTERY 15A

ACC

BATTERY 15A

ACC

C

C

A7: IGN or ACC switched 12 V supply

(Red)

(Yellow)

(Yellow)

(Red)

(Red)

(Yellow)

(Yellow)

(Red)

(Red)

(Yellow)

(Red)

(Yellow)

A4: IGN or ACC switched 12 V supply

A4: +12 V Battery (Permanent supply)

A7: +12 V Battery (Permanent supply)

A7: +12 V Battery (Permanent supply)

A4: No connection

Example: Connection with CD changer CX-DP88N (Option)

y ISO Antenna

Adapter
(If needed)

(L) (White)

(R) (Red)

(R) (Red)

(L) (White)