Eureka 7600 SERIES 用户手册
HOW TO USE
CAUTION: Moving parts, make sure on/off switch is in off position before
plugging in.
CAUTION: Never leave plugged in cleaner unattended.
An upright vacuum cleaner will clean any type of carpet. Do not place cleaner on
furniture or steps as the brush roll may cause damage.
furniture or steps as the brush roll may cause damage.
Cleaner Height Setting
WARNING:
Avoid injury. Keep loose
clothing, hair, fingers, and
all other parts of body
away from any moving part
(such as the revolving
brush). Turn off the switch
and unplug the cleaner
before changing the
cleaner height setting.
clothing, hair, fingers, and
all other parts of body
away from any moving part
(such as the revolving
brush). Turn off the switch
and unplug the cleaner
before changing the
cleaner height setting.
The front of the cleaner has an adjustment
that raises or lowers the cleaner base to
match the type of carpet. With the cleaner
cord unplugged, set the adjustment to
lowest setting for maximum cleaning. If the
cleaner is difficult to push, move adjustment
to next highest setting until cleaner is
comfortable to push. The brush roll must
reach the carpet for effective cleaning.
that raises or lowers the cleaner base to
match the type of carpet. With the cleaner
cord unplugged, set the adjustment to
lowest setting for maximum cleaning. If the
cleaner is difficult to push, move adjustment
to next highest setting until cleaner is
comfortable to push. The brush roll must
reach the carpet for effective cleaning.
Make each adjustment with cleaner
switch off and cord disconnected from
outlet. For ease in moving the adjustment
knob, place handle in operating position and
tilt cleaner back to remove weight from front
wheels.
switch off and cord disconnected from
outlet. For ease in moving the adjustment
knob, place handle in operating position and
tilt cleaner back to remove weight from front
wheels.
4. Step on handle release. Pull handle
back to a comfortable position.
5. Push On or Off power switch.
5
1. Adjust cleaner height setting to
lowest position for maximum
cleaning. Adjust to a higher setting
to make pushing easier. For easy
adjustment, tilt the cleaner back to
move setting knob.
cleaning. Adjust to a higher setting
to make pushing easier. For easy
adjustment, tilt the cleaner back to
move setting knob.
2. Place electrical cord out of the way
on the cord clip while vacuuming or
storing.
storing.
3. Plug electrical cord into outlet.
1
Cord
Clip
Clip
2
POWER
4
Handle
Release
Release
Operate
Clean
Under
Under
POWER
1
5