Eureka 7600 SERIES 用户手册

EUREKA PRODUCT

Look for the

            symbol.

For location of nearest Eureka
Warranty Station or service
information call 1-800-282-2886.

The instructions in this booklet serve as a guide to routine maintenance. To avoid
unnecessary service calls, check the bag, belt, and brush roll often.

The brush roll turns to brush and sweep the carpet.  Remove hair and threads from the
brush roll so it can continue to brush the carpet.  To maintain the most efficient cleaning,
the bristles must touch the carpet. To test the bristle length, hold a ruler against the
underneath side of the cleaner. If the bristles no longer touch the ruler, replace the
brush roll.

The brush roll belt turns the brush roll as the
bristles sweep and brush the carpet.  Check
the belt regularly to be sure it is in good
condition. Replace the belt if it stretches,
cracks or loses tension. Cut away any hair or
threads wound around the brush roll or the
belt pulley because the buildup could cause
the belt to rotate unevenly.

p

p

p

p

p

p

p

p

p

p

ppppp

ppppp

7

1. Turn the cleaner over.  Pull up to

remove bottom plate.

2. Lift out brush roll and discard old belt.
3. Fold new belt to slide it around the

motor pulley.

4. Place belt around pulley end of brush

roll.

5. Pull left end of brush roll down to stretch

belt. Align the end cap with the base
and push down to secure.

6. Seat right end cap.
7. Turn the brush roll until the belt centers

onto the brush roll pulley.

8. Slant front of bottom plate

to catch tabs into cleaner
slots. Push down above
each hook to snap into
place.