Pioneer VSX-D712 用户手册

Setting up the receiver

 06

47

En

We recommend setting this to 

200Hz if your 

S speakers are smaller bookshelf-type 
speakers.

 or  to specify the crossover 

100Hz
Sends bass frequencies below 100 Hz to 
the subwoofer (or 

L speakers).

150Hz
Sends bass frequencies below 150 Hz to 
the subwoofer (or 

L speakers).

200Hz
Sends bass frequencies below 200 Hz to 
the subwoofer (or 

L speakers).

• If all speakers (front, center, and 

surround) are set to 

L, the crossover 

frequency can’t be set because there are 

no 

S speakers (

 appears in the 

display).

LFE attenuator setting

• Default setting: 

Dolby Digital and DTS audio sources include 
ultra-low bass tones. Set the LFE attenuator 
as necessary to prevent the ultra-low bass 
tones from distorting the sound from the 
speakers.

 or  to set the attenuation 

 

dB(∞)).

• When ∞ is selected (

 appears in the 

display), LFE cannot be heard.

Front left speaker distance setting

• Default setting: 

Sets the distance from the front left speaker to 
the listening position.

 or  to set the distance of the 

Center speaker distance setting

• Default setting: 

The center speaker is normally placed directly 
in the front of the listening room and closer to 
the listening position than the front speakers. 
This means that the sound from the center 
speaker will be heard before the front 
speakers. To prevent this, set the center 
speaker distance setting to delay the sound 
from the center speaker so that the sound 
from the front and center speakers will be 
heard at the same time.

∞

 (displays      )