Pioneer VSX-D712 用户手册

Setting up the receiver

 06

49

En

Subwoofer distance setting

• Default setting: 

Like your speakers, you should set the 
distance of the subwoofer accurately to hear 
sounds from all speakers at the same time. 

 or  to set the distance of the 

• When 

SW NO is selected in the 

subwoofer setting, the subwoofer 
distance can’t be set.

• Default setting: 

Dynamic range is the difference between the 
loudest and softest sounds in any given 
signal. With this setting, you can compress 
the dynamic range, so that low level sounds 
can be heard more easily (sounding relatively 
louder) yet louder sounds won’t be too over-
bearing.

 or  to set the dynamic range 

• When listening at low volumes, set to 

MAX for maximum dynamic range 
compression.

• Dynamic range control is effective only 

when a Dolby Digital or DTS signal is 
being played back.

Dual mono setting

•

Default setting: 

The dual mono setting can only be used when 
listening to Dolby Digital and DTS signals 
with dual mono encoding. It is sometimes 
used when it is necessary to have one 

language on one channel and a different 
language on the other. With this setting you 
can choose which channel in the dual mono 
setting you want to listen to.

If Dolby Digital mode is switched on, you will 
hear the channel you have selected (either 
ch1 or ch2) through your center speaker. With 
Dolby Digital mode off, or if you don’t have a 
center speaker, you will hear the channel you 
have selected through both front speakers. In 
the 

L ch 1.R ch2 setting, the left front speaker 

will play channel 1 and the right front speaker 
will play channel 2.

 or  to cycle through the 

Component video input settings

Here you tell the receiver what components 
you have hooked up to the component video 
jacks on the back of the receiver. 

Component video 1:

• Default settings: 

 or  to assign the component 

Component video 2:

• Default setting: 

 or  to assign the component