Sony STR-DN2010 用户手册

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

You can adjust each speaker manually on the 
“Manual Setup” screen. You can also adjust 
the speaker levels after the Auto Calibration is 
completed.

You can adjust each speaker’s level (front left/
right, front left/right high, center, surround 
left/right, surround back left/right, 
subwoofer).

Press 

V/v/B/b repeatedly to select the 

speaker on the screen for which you 
want to adjust the level, then press 

.

Press 

B/b repeatedly to select “Level”.

Press 

V/v repeatedly to set the level of 

the selected speaker, then press 

.

For front left/right speakers, you can adjust 
the level from –10.0 dB to +10.0 dB in 

 

0.5 dB steps. For other speakers, you can 
adjust the level from –20.0 dB to +10.0 dB 
in 0.5 dB steps.

When one of the sound fields for music is selected, 
no sound is output from the subwoofer if all the 
speakers are set to “Large”. However, the sound will 
be output from the subwoofer if
– the digital input signal contains LFE signals.
– the front or surround speakers are set to “Small”.
– the sound field for movie is selected.
– “PORTABLE” is selected.

You can adjust the distance from the seating 
position to each speaker (front left/right, front 
left/right high, center, surround left/right, 
surround back left/right, subwoofer).

Press 

V/v/B/b repeatedly to select the 

speaker on the screen for which you 
want to adjust the distance from the 
seating position, then press 

.

Press 

B/b repeatedly to select 

“Distance”.

Press 

V/v repeatedly to set the 

distance of the selected speaker, then 
press .
You can adjust the distance from 3 feet 

 

3 inches to 32 feet 9 inches (1.00 meter to 
10.00 meters) in 1 inch (0.01 meter) steps.

• Depending on the speaker pattern setting, some 

parameters may not be available.

• This function does not work in the following cases.

– “A. DIRECT” is being used.
– Signals with a sampling frequency of more than 

96 kHz are being received.

You can adjust each speaker’s (front left/right, 
front left/right high, center, surround left/right, 
surround back left/right) size.

Press 

V/v/B/b repeatedly to select the 

speaker on the screen for which you 
want to adjust the size, then press 

.

Press 

B/b repeatedly to select “Size”.